Search results

  1. C

    BCM57711 BSOD in srv 2019

    Roelf, did you ever figured this out? My r620 with windows 2019 would bsod right before the login screen. I was able to update to firmware 7.12.19 using a windows10 pc. The r620 now able to boot and login but bsod after a few minute. I even tried to disable the devices under manager, but it...
  2. C

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Yes: Thanks... will try another cable.
  3. C

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Bad switch or bad cable? This is what I get when connecting to the console... same for all four 6610-48p... I am using this cable (USB2.0 to RJ45 Cable USB to Serial/Rs232 Console Rollover Cable for Cisco Route). https://i.ebayimg.com/images/g/VXMAAOSwRqleBrU3/s-l1600.jpg
  4. C

    QSF+ and QSF cables

    new to qsfp, researching to stack 4 icx 6610 (40gbe ports). i notice there are 40gbe qsfp(+) and 4x10gbe qsfp(+) (not the breakout), are these one and the same, just labeled differently or same type of cable but different personalities?
  5. C

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    Does this mean you are still handing out licenses? I am looking to pickup some 6610-48 and 48p to swap out my dell 6248/cisco 6120xp setup. The enterprise license to play does terrify me greatly; I learned my lesson with the cisco 6120xp. Lucky for me you can flash them to nexus 5010 and use dac...
  6. C

    How to reformat HDD & SSD to 512B Sector Size

    Thank you Pete. I bought the h310 controller... I'm in the process of formatting all my hus156045vls600 netapp to 512. So far, i was able to initialize one drive and tested moving and deleting some files... seems to work fine. Has anyone run into reliability issues with these formatted netapp hdds?
  7. C

    How to reformat HDD & SSD to 512B Sector Size

    Hi Pete, I too have a PE2950 with perc6i; i am having trouble getting sg_scan to list the drive. So the only way is to install the h310 controller? (did you replace the perc 6i or installed the h310 adapter version?) I am trying to format bunch of hitachi netapp... Using CentOS7 Live usb; but...