Search results

@teal you didn't mention whats inside the lenovo, take a look here (direct link at the C states), but C8 is still pretty good

@USSZulu try posting on Intel forum, it seems that they have to give access, also try not to mention the github firmware page...just in case https://community.intel.com/t5/Ethernet-Products/Where-can-i-download-I226-V-NVM-and-Flash-update-tool-and-image/td-p/1682975

If you still want a PTM like sheet you can try Thermalright Heilos, here is some benchmarks from Snarks Domain cpu https://drive.google.com/drive/folders/1T_Px_8YAYxz2ZTkBQrFR6uBTfgR68fZG or gpu https://drive.google.com/drive/folders/1Fo8KsBtSqg33gikYmeMXD0Y4xzIFkAES I've taken the easy/cheap...

Try taking a picture closer of the board where that QR code is located, maybe also scan that QR code. The chip with 8 pins that is located a little up and to the left it looks like it, use google images to search for "SOIC8". If you have a multi-meter, please remember to take voltage...

let's investigate: 1 - 25Q128JVSQ Density 128Mb 2 - 25Q80DVSIG Density 8Mb 3 - 25Q80DVSIG Density 8Mb if we download any of the iso files from CWWK and look inside the files: auto.nsh cd CW-ADLNT-2L cd bios EfiFlash.nsh and now inside EfiFlash.nsh Fpt.efi -f CW-X86-P5.bin pause...

And a few words of advice from me: - my board has the flash memory 25Q128JVSQ that works with a minimum of 3V, please check if you have the same flash memory, if not search for the datasheet - check CH341A USB Programmer with a voltmeter that you actually have 3,3V, if not move the corresponding...

The problem is that CWWK support recommend the iso for v2/v3, when the board is actually v1. I've bitten the bullet and flashed the CW-AL-2L-V1(X86双网N100-N200-I3-N305-V1出厂默认原始版本)2024.04.07.iso on my x86 p5 v1 (the sticker on the ram slot CWX86P5N100.11.F1) without the SSD connected, only...

there is expansion board, but I cannot find it how to order it, most likely it depends also on the board version v2....v3 and all in one, without a case...

v1 manual for x86 p5 https://gofile.io/d/RmutYy

https://noctua.at/pub/media/wysiwyg/Noctua_PWM_specifications_white_paper.pdf at page 7

I had the same experience when I first turned it on, my first reaction was its DOA or bad RAM, but after leaving the unit powered on with only the HDMI cable and keyboard connected (at that time I've didn't connect any NVME drive)........ after a few minutes....BEEP and image on the monitor.

For X86-P5 Win11 (usb installation drive created with rufus without the TPM requirement) Samsung 970 EVO Plus 1TB (MZ-V7S1T0BW) Proxmox with SK hynix Gold P31 1TB (SHGP31-1000GM)

Here you go, but remember the user manual is for CW-X86-P5 v1, other users received a newer version v2. If you ordered from aliexpress you can send a message to the store, they will ask for a email address where to send the pdf file https://gofile.io/d/5uCizt

nice find @Foxandxss the repo its old, after search around on github for a newer version I found a repo that is maintained https://github.com/frankcrawford/it87 and for the lazy, like myself...It says Gigabyte but it works, PS: I've already had linux-headers installed...

Watch this video and after hold the nvme with the thermal pad and the heatsink to a light source and see if there is contact between the controller/nand + thermal pad + heatsink. And if you have a caliper, even better, because you can measure the total height of the NAND and the controller. As...

Ask and you shall receive.......... the user manual for x86-P5 aka CW-X86-P5 aka CW-ADLNT-1C2L, useful especially for pin-outs and jumpers CW-X86-P5-Chinese.pdf - original pdf file CW-X86-P5-English.pdf - translated from Chinese to English with Google Translate uploaded to gofile because...

Here is a collections of links that I've used https://tteck.github.io/Proxmox/ Proxmox VE Tools -> Proxmox VE Post Install ----should help with the writes on the NVME, the main culprit is High Availability in Promox https://github.com/Meliox/PVE-mods/ Used: Node temperature view Not used...

at full load, yes......see below Here is some insight for CWWK X86 P5 N100 paired with: - SK hynix Gold P31 1TB (SHGP31-1000GM) - Corsair Vengeance 32GB DDR5 4800MT/s CL 40 cmsx32gx5m1a4800c40 - Arctic MX-4 between case and copper shim and N100 - default bios settings - Shelly Plug for power...

Try this tutorial, its for pfsense but it should work also for OPNsense https://docs.netgate.com/pfsense/en/latest/recipes/virtualize-proxmox-ve.html#virtualizing-with-proxmox-ve

The main problem is the price, on cwwk(dot)net you have: Welcome to the CWWK store. Get discounts when you buy from us, plus free shipping and tax! ! ! on aliexpress, if the destination is E.U. (my case), aliexpress automatically adds the V.A.T (to the total price). The V.A.T can be as low as...