Search results

Can somebody point to a dual SFP+ card on ebay.com which will work with P330?

Will this work with framework 13 laptop AMD AI 300 series? It has 4 usb-c ports and supports the following:

What about PWS-1K28P-SQ, is that compatible with this PDB? Supermicro states that PWS-1K28P-SQ is compatible with PDB-PT747-4648 and PDB-PT846-2824 I couldnt find a definite article saying PWS-920P-SQ is not compatible with PDB-PT747-4648.

So, i gave this a go. The original PDB in the chassis was PDB-PT846-2824. I replaced it with PDB-PT747-4648. The power supply is PWS-920P-SQ. As i switch on the system, i had a burning smell. The SSD connected to the MCP-220-84610-0N (MCP-220-84610-0N | Drive Kits | Accessories | Products...

Hello, I got myself a PDB with more cable for the GPU. Are there any instructions i can follow to replace the PDB? Thanks

Can this be rack mounted?

Thank you that was it. After changing to x4x4x4x4 both the drives showed up.

Hello, I have a Supermicro x10dri-t with a single CPU populated (to save power). I want to use two U.2 drives pcie adapter (https://www.amazon.com/PCIe-SFF-8639-Adapter-NVMe-SATA/dp/B09WR1ZZVQ) with this. The bifurcation was set on Port 2 since this is the only available x16 slot...

Hello, I only have 2 rear USB ports working which are numbered 5 and 6 in the image below. Any device plugged into 3 and 4 or the onboard connector is not recognized by the system. I suspect that these interfaces are the ones connected to ASM1042 as per the diagram below. How can i make...

This was it! I had a script which was controlling the fans and it was causing the bmc to be reset. I have now disabled the script and am not seeing bmc resets.

I dont see any init ID button in the IO shield area. Is that present in H12SSL-i motherboard? Are the tiny things around the ASPEED BMC chip? I am running the system with an open case. This is the temperature readings,

Hello, The BMC in my motherboard reset after a few minutes. The logs shows a repetitive sequence of, [MEL-0131] iKVM was launched successfully [MEL-0212] The fullsmbios file was uploaded successfully [MEL-0056] BMC was reset successfully [MEL-0132] iKVM was closed successfully The firmware...

I picked up a drive from this vendor. The smart data shows a power on time of 5.7 years and this, ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9...

Sent a pm

Did you have buy anything else other than PDB-PT747-4648? There was some talk about changing a 'sled' as well. I am interested in replacing PDB-PT846-8824 in my chassis as well. I am hoping it has enough molex connectors to drive the SAS3 backplane of 846 chassis.

Is this the correct cable?

Hello, My CSE-846 is missing a rear fan connector cable. Where can i get the 4 pin cable to plug into the housing (in the US)?

ah. Thanks for correcting me. I see this, $ storcli show CLI Version = 007.3103.0000.0000 Aug 22, 2024 Operating system = Linux 6.12.34 Status Code = 0 Status = Success Description = None Number of Controllers = 1 Host Name = portable Operating System = Linux 6.12.34 StoreLib IT Version =...

I bought the 430-8i card. It is recognized by the system $ lspci 81:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS3408 Fusion-MPT Tri-Mode I/O Controller Chip (IOC) (rev 01) lsiutil shows the following, $ lsiutil LSI Logic MPT Configuration Utility, Version 1.72, Sep 09, 2014...

Hello, I would like to have two additional drives in my Supermicro 846 chassis. It is an OEM version and carries a sticker saying 'Factory code: ABC-02'. The back of the chassis looks like the photo below from this thread. The internal photo of the chassis is at the bottom. a) Can i install...