Search results

@crept did you ever get this resolved? We are seeing the same PDF issue in omnios-r151046 with NBMAND=ON and oplock_enable=true smb.conf: system_comment= max_workers=1024 netbios_enable=true netbios_scope= lmauth_level=4 keep_alive=5400 wins_server_1= wins_server_2= wins_exclude=...

I am doing just this with an old gen 8 microserver to get some internal NVMe SSDs in addition to the onboard 3.5 spinners. Price isn't a huge concern. Should I be looking at a 9400, 9500 or 9600 tri-mode card?

There was a discussion somewhere regarding the upcoming Kerberos signing changes with Microsoft and how this would affect omnios/napp-it somewhere but I cannot find it. Will AD authentication fail once this change is enforced by microsoft? What version of omni-os addresses this? Hoping to...

dang this would be perfect except you cant hotswap: https://www.broadcom.com/products/storage/raid-controllers/megaraid-9540-2m2

9361s OE LSI for the most part. I think I have one that was IBM branded and ironically that’s the only one that still works. I don’t care about speed so I would be totally happy to stick with old school 6gbps stuff but the VIB thing is the sticking point. Seems like I am just generating tons...

Oh wow, brass ones would be great! Do you have a source for these or are you pillaging them from other cards?

Does adaptec have a VIB for raid status monitoring? Is it compatible with esxi 7 or 8?

I am looking for RAID cards that don't suck

I have had nothing but problems with lsagroadcom 12gbps megaraid cards. Corrupt firmware (x3), heatsink mounting pins snapping and overheating, and inability to import foreign configs. All I am using them for is a simple raid1 120gb SSD boot array for esxi. I relied on the LSI VIB in the past...

will this impact normal SMB (ie NOT netlogon) shares hosted on solarish in a domain environment? Or is the concern that new solarish boxes will not be able to join the domain until they support RPC sealing?

I have been using ZFS for my network shares since 2013. I keep biannual snaps indefinitely and currently I have biannual snaps from 2014-current. At some point I migrated servers and forgot to send the oldest 2013 snap first. I just came across a copy of this 2013 ZFS filesystem on some old...

Oh nice, it came in my Asus ESC-8000 server so as long as it has an HBA mode I should be good to pass this through to an omniOS VM for ZFS

So is there any way to flash the Asus Pike II 3108-8i/16pd to IT mode?

has anybody confirmed joining a domain works with SMBv1 disabled? I'm assuming normal CIFS fileshares work with SMBv1 disabled now too?

Buffer did not appear to help. Weird thing is if i vmotion a VM from one AIO box to another AIO box i get the full 10gb speed. Any other suggestions?

I have 64GB of RAM allocated to the omniOS VM, I read that more ram is preferred over a SLOG but maybe that is no longer the case. I do have sync disabled for my pools but i still get the slow speed on ZFS send. My target pool is empty and the sending pool is 50% full. I understand that my...

begin tests .. Bennchmark filesystem: /pool01-hdd/_Pool_Benchmark Read: filebench, Write: filebench_sequential, date: 06.18.2019 begin test 4 ..singlestreamwrite.f .. begin test 4sync ..singlestreamwrite.f .. set sync=disabled begin test 7 randomread.f .. begin test 8 randomrw.f .. begin test 9...

I finally made the jump to 10GB on my nappit AIO boxes and thought I had followed all of the recommendations, but I am still getting gigabit speed ZFS sends using NC. The weird thing is iperf gives me 8.9 Gbits/sec throughput so I'm not sure if any of the tuneables will help me here. The pool...

you may want to run your CPU by the vmware HCL. I'm pretty sure they dropped lga1366 support after 6.5 officially, unofficially it may still work fine

I have an x9 board I got off eBay that has corrupt ME firmware that I could not get to flash for the life of me. Can yafukcs dump ME firmware?