Search results

Theoretically AOM-SXMV is not sensitive to signal issues, but PCIe signal loss is superimposed in the system. Most of the loss comes from the connector and the length of cable. There are two PCIe connectors and one JPCIE connector in this system, so there is not much accectable loss left for the...

This may due to different loss values of different PCIe slots on the motherboard, or oxidation of the contacts of the PCIe slot.

LED[5,4,*,2] and [9,8,*,6] on with 3 and 7 off is normal. LED 2,6 are upstream and the rest are downstream. LED8 turning off means that one graphic card is lost, LED6 flashing means that the upstream is downgraded from PCIe gen3 to gen2. The loss of graphic card may be caused by poor contact in...

The LEDs next to the PLX are the PLX upstream and downstream LEDs. One PLX has one upstream port and three downstream ports. During normal operation, three LEDs on each side are always on. If the upstream LED goes out during operation, it means there is a problem with the adapter cable. If the...

Yes, in theory you can use pcie riser cable + AOM-SXMV-PIO board, but due to multiple transfers, not all riser cables can work stably. This is what I found after I selected several riser cable suppliers.

Yes, AOM-SXMV and AOM-SXM2 requires two cables to support 4 sxm cards, so we do not sell them individually, the price is for two cables.

The AOM-SXMV riser cable is now available on Taobao, and you can buy it through shopping agents such as Superbuy. Link: 【Taobao】https://m.tb.cn/h.5v5VyD2QljwgbKI?tk=viO4WOSh8W0 CZ0012 「AOM-SXMV AOM-SXM2 adapter cable AOM-SXMV-PIO」 Click the link to open directly or search on Taobao to open directly

This cable was designed by me and has been tested. I am currently communicating with the factory on how to produce it.