Search results

Damn didn't read properly, you need a soic8/sop8 test clip. You can get it together with a ch341 on AliExpress. Click If not available in you location search for a ft232h Dev board.

@treg You can buy a wson8 adapter, but it's tricky to use. Link You can find better ones on Ali express with a plastic guide. @Gamienator Try to add a thermal pad on top of the NVMe to cool it trough the backplate.

someone added the P360/m90Q gen3 pre release bios on badcaps forums. I know this machine works fine with ES cpus probably also with any Graphics cards somone needs to Tinker with the bios file...

I'm from Germany if interested. Already did a bunch of these mod also with switch for on/off the bifurcation.

Good idea had the same. Maybe we can use it together with the repo from a little WiFi? https://github.com/a-little-wifi/TinySecrets

On any older machines like tiny 4 and 5 these is the right one. I wouldn't believe he changed it on a newer machine. If you can't find a solution you can also ask on Badcaps forum for a bios fix. But you need to dump your bios.

Hmm then I don't know, sorry Maybe try with an older BIOS. If this also do not work you need to contact support. https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/M90q-Gen-4-Desktop-BIOS-Update-needs-a-roll-back/m-p/5327564

Front usb is fine And 2-4 is the right one. Remove also the riser with PCIE card. Looks fine to me

Yes 2-4 is the right one. Hmm then things are getting complicated. Can you remove anything unnecessary? Only CPU and ram nothing else, something blocking the boot up Maybe try another ram also.

You can send also send a picture from the Jumper position and I can tell if it's the right.

Is the usb key formatted in fat32? Never tried another filesystem but maybe this is the problem.

Try a Bootblock recovery, bring your BIOS update on a USB key and bring the jumper to CMOS reset. Plug in the usb key and start your machine. Wait until it's done (shuts off) and try if it worked.

I bought this one from AliExpress click It's an X8 Riser and works fine with my bifurcation mod. Be sure it's labelled with "Tiny 4" Many sellers mixing the fru numbers, the right number is "01AJ902" and only these for m910x

Can anyone recommend an HBA card with a 6088 port (external) for a ThinkCentre tiny m920x?

No Problem https://drive.google.com/file/d/134XR6mzVIlSksonsP-35LpaD8boflWCI/view?usp=drivesdk

Don't bother with it, it's not worth the time. You can flash it through a usb key.

Yes works fine, p330 has also the full copper cooler for it.

Can you please take some pictures from the inside?

I'm getting an gen2/p350 soon and will look into it. But without boardview and schematic it's really hard to figure out the parts.

I found an p350 Tiny with 3 NVMe drives and wwan port on Xianyu marketplace. It's a pre release board (rev0,5) There is also a p3 tiny pre release board available there. https://m.tb.cn/h.g4JVPWd?tk=Y9XdWya5ILD