Search results

Yeah some fw is really locked down evil. https://forums.servethehome.com/index.php?threads/updating-the-hgst-hdd-ssd-firmware.22381/post-497447 :) https://hddoracle.com/viewtopic.php?f=59&t=3279 https://hddoracle.com/viewtopic.php?f=59&t=3280...

Backwards compatibility / replacement parts for the 400GB model / machines that expect it that way. https://forums.servethehome.com/index.php?threads/lu-is-resource-provisioned.44413/post-428108 I would try this and hope for the best (replug after it is done): sg_format --format --size=4096...

Try MG04-SCA-0104.zip from https://files.hddguru.com/download/Firmware%20updates/Toshiba/ I can report success with crossflashing Netapp X477_TTCRE04TA07 NA03 -> TOSHIBA MG04SCA40EE 0104 and even back with X477_TTCRE04TA07.NA02.7z from...

@fohdeesha Regarding vendor-specific firmware locks, are you familiar with my threads on that other forum? https://hddoracle.com/viewtopic.php?f=59&t=3279 https://hddoracle.com/viewtopic.php?f=59&t=3280

Bonus: https://forums.servethehome.com/index.php?threads/guide-crossflashing-fujitsu-praid-cp400i-d3307-a12-to-it-mode.41915/post-396971 Fujitsu PRAID CP400i <- I can confirm that I crossflashed this model and it was cheap at my location. Yeah, looks good. But sometimes this big brand stuff is...

https://dl.dell.com/topicspdf/hba355_ug_en-us.pdf <- on page 9 there it is. LSI Fusion-MPT 12 G SAS/PCIe Secure SAS3816 + non raid = should be "IT" But try it out in test environment. Anyway, it does never hurt to have such an HBA with IT-FW laying around as spare part. ;)

If your R750 allows non-whitelisted Hardware, you can choose any HBA you want or is available for small bucks at your location. https://forums.servethehome.com/index.php?threads/lsi-raid-controller-and-hba-complete-listing-plus-oem-models.599/ Choose minimum SAS2308 or SAS3008 based ones. The...

Wrong question. The question is about IT(integrated target)-Firmware vs IR(integrated Raid)-Firmware. You want IT-Firmware for ZFS, not the IR. Depends what "dell firmware" is. IT or IR? It is possible to enforce a ZFS-setup on IR (with multiple raid0s coming "out of the IR-firmware"), but you...

Thx, I'm blind. ;)

Yes, these are only the generic files.

Doesn't work that way. If you can pass security checks aka "vendor commands" you can sometimes download only parts of the mostly over 100 snippets/modules (yes, a 2MB firmware looks innocent, but it's complex af) but you won't get the drive to spit out a binary ready to flash another disk and...

Those cards always need a driver to work to be precise, but I think you wanted to say that you don't need to fiddle that manually with most linux distris. :)

Does anyone happen to have access to the Huawei Unifi Center and could obtain this firmware and share it here? Thx :D https://support.huawei.com/enterprise/en/software/260417189-ESW2000767977 Medium_1.6.0.1_Software_Linux_HGST-AKP-HUS726060AL5210-ADR2-x86.zip

https://files.hddguru.com/download/Firmware%20updates/Seagate/NetApp%20Branding/?order=mod&direction=1

= APM Choose either APM or EPC. Double-check with hdparm; if in doubt, explicitly disable APM and also disable TrueNAS's own GUI power management settings. Then choose either idle_c or standby, but definitely not both! Idle_a and idle_b can stay; they won't interfere with each other.

Some cards need a jumper during the flash (write access) and then pulled again for normal usage. Maybe your card needs it? https://www.servethehome.com/wp-content/uploads/2016/11/IBM-M1215-LSI-SAS3008-HBA-jumper-on-and-off.jpg

@schlagbaum https://hddoracle.com/viewtopic.php?p=24028#p24028 In regards to the e6dump...but I'm out of ideas.

You don't need special vendor tool, you just need the correct binary file to flash. You could boot linux live version, there you can use fwupd, seachest/seaflash, hdparm. Or you can use FreeBSD live, there you have native camcontrol and also hdparm. All of them are universal, you just need the...

It won't burn your data, but treat it like it would and be prepared, so do a backup before anything.

HUS726040AL5214 is 4k disk, so try 1:1 https://forums.servethehome.com/index.php?threads/bounty-free-disks-if-you-can-figure-it-out-struggling-with-these-toshiba-px02smu080-800gb-sas-sed-ssds.41884/post-396788 I don't know about HP HBA, with LSI with IT-Firmware it works.