Search results

Cool keep us posted. When I get my refund from Lenovo I might also switch my P3G2 against that... But also waiting for a sale which might never come... Just order it directly from Lenovo parts. You will need the X4 riser though, so your 2x25Gbjt would be limited at full throughput. If you want...

This would be a fun addition to the tiny... But only with at least a RTL8157 on USB or another 10GbE on the 3.0x1 slot. https://www.techpowerup.com/345307/interesting-amd-fch-on-a-stick-addon-card-gives-the-appearance-of-intel-cpu-on-amd-chipset

I get 3-4W with a 235, 48GB RAM and 2x 2TB 970 Evo. So Arrow Lake is capable of similar values. It's just the C package states which are flawed as soon as you add any PCI Express card to any riser (either x16 phys or x4 phys). Then you drop to C3 from C8 and its up to ~11-13W. Then add 3-4W for...

No. It seems the x16 physical riser does only work for graphics cards on the arrow lake platform. I have the same issue with my P3 Tiny G2. The x4 riser does work. You do have the Thunderbolt Card in the PCI Express riser? So the riser does work for you? Compile powertop from the latest source...

Got another x8 riser for my P3G2/M90Q Gen6 and neither X710/XVV710 are recognized by it. It stops in C1 though, so it seems to be "present". With the x4 riser both are fine, but C2 is max. Seems like Arrow Lake in the Tiny doesn't go lower :( - Sad. Need to accept this now or look for a Gen 5...

I am running out of ideas. For my P3G2 I know have the 4x Riser as well in addition to the x8, but ASPM still does not seem to work for me. Any ideas for debugging @WifiCable ? I couldn't test the Intel X710/XVV710 yet, but my RTL8127 full reports ASPM enabled. I am still waiting for a riser...

I was specifically ordering the P3G2 with the T400 card to get the "new" x16 riser, as I thought it might take some time to get this available via the parts site of Lenovo. So for the others, according to the documentation there is the new x16 (5C50W32107 - which is called "PCIe x8 Riser Card"...

Ah so you are using the x4 riser instead. I actually ordered my Gen 6 with the NV card to initially already get the right riser... Seems I was wrong after all. I've ordered the x4 and waiting for WifiCable to maybe create a better one in the future ;) So I guess the layout is then then first...

Hey @wiggy, could you please elaborate on this part and maybe share a picture? So you are basically using the x16 90° Riser on the board and put a x4 riser in between (with dremeled off ends), so that the x8 card fits into the x4 riser? I am running into the same issue as stated early with both...

I did another look at what I can configure on the Tiny and everything power related (towards savings) is turned on, WOL is off. It's also normally going doing to C8 package state and "C3" for CPU cores. I might try another BIOS update and maybe an upgrade to Ubuntu 25.10. But this feels rather...

Hey guys, I am running a P3 Tiny Gen2 with a Intel 235 lately as upgrade from my HP minis - basically due to the PCI Riser. I bought it with the NV card but sold that, so I have now a freshly updated X710-DA2 and XXV710-DA2. Both cards fit very tightly into it and seem to run nicely with the...