Search results

  1. T

    LSI 9265-8i - expected chip temperature

    Thanks again. I was going to bring up questions on the BBU next. I currently do not have a BBU for the LSI, but the entire system is hooked up to an APC smart 700 rack UPS. From the LSI documents, they recommend not enabling write-back unless you have the BBU or are on an UPS (makes sense)...
  2. T

    LSI 9265-8i - expected chip temperature

    Thanks all. My system is based around a Norco RPC-430, 4U. Using this since my rack is under 20" deep. Some parts (cpu/motherboard) were leftovers from older builds. Main use is multimedia streaming throughout the home, but will also be used to backup all the machines (especially the teen...
  3. T

    LSI 9265-8i - expected chip temperature

    I have finished building a new home server using raid 6 with 8x3tb drives, using an LSI 9265-8i raid controller card. When I first fired up the system, just going into the LSI CTRL-H bios setup, after a few minutes the chip temperature of the LSI controller was HOT - so hot that I burned my...
Top Bottom