Search results

The pump is connected to SATA power, its has an actual 4pin connector "for what reason I don't know" it only has three wires , 3rd pin is skipped , another 4pin male with a wire comes out of the pump and that goes to the fans using Y Splitter . it works , I just never seen it go high RPM...

Thank you for this excellent piece of software. Question is there a way where it can run and execute the OC at startup? Everytime I boot the machine I need to run the app, would be nice if I can run with command script?

OK, its water block pump connected to J34 and its a 4 pin connector. If I pull the connector, the alarm goes off and the fans GO FULL BLAST, if I reconnected it, it goes back to normal speed.

Rome. 7F52 . Looking into the 4 pin connector and where its connected. Thanks.

I know this maybe old.. But can someone please, please tell me how to fix the FAN issue? It simply does not speed up. I have to set to 40 or 50 percent, so when I mine or play games it wont start beeping, and even at 50, it beeps, unless I set full blast... How can I make it ramp up automatically?

Ok, oh well. Thank you for the response. Maybe some one can hack a bios for it.

Has anyone seen a EPYC ES fix for this MB?

Did anyone figure out the issue with the ES cpus? Is there a fiX? Thank you

looking for hacked bios. supermicro h11ssl-i. That can allow me to adjust memory clock settings and wetnot. Thanks Need to speed up a 7742 setup.

Hi, i have this file H11SSLv2.0SSPMod , please tell me where can I find instructions?

Florida, USA

any 7742 100-000000053-04 ES?

Wanted EPYC 7742 100-000000053-04, PAYPAL OK

SOLD

Greetings, I have a Supermicro H11SSL-i with an Epyc 7601. Can I occupy all the memory slots with 4GB RDIMM sticks? instead of 8gb RDIMM? I'm getting a deal on the 4GB RDIMM, its less of a cost, same specs DDR4-2666 CL19, it's just 4GB. ( Crucial 4GB DDR4 2666 PC4-21300 ECC Registered...

Thanks. I planning 2.60 - 2.75 is where I would need them for mining. Seems I will be able to achieve it. Not planing on pushing them to the MAX, just want stability. Thank you, It helps.

Is it possible to make the run like if it was a stock 7742. Do not wish to super overclock them.

Hello, can anyone tell me the performance for the zs1406e2vjug5 CPUs? on Supermicro h11dsi? looking for stable performance and tweeks. Thank you.

H11DSI REV 2.0 - Dual socket board. Is what I have been using. SO I guess I will use Rome_H11DSI_REV2 and then set the bios settings accordingly. THE IOMMU and 4GB above.

There are 5 bios files in the archive? which one?