Separate names with a comma.
Hmm, I am getting vastly lower mining rates on my E5-2670 V1s. I'm maxing out at around 400 h/s
I have had zero issues with mine so far, using my Add-on DACs.
Just before I give up on this card, does anyone know if ConnectX-3 (Ethernet) drivers are available in OmniOS? Googling didn't really bring up much.
Haha, yep. Just labeled all the drives and took them out :)
Now comes the fun part of trying to rack it without a rack lift and solo!
I know pictures are overdue, so here are a few!
I use an Add-on to go from juniper to ubiquiti, works well.
Also, AWS plugin is coming in November for TrueNAS, unsure if it's being implemented in FreeNAS.
It was recommended by someone in the mailing list of OmniOS to reset BIOS to optimized defaults, works perfectly now.
Recorded the IPMI window.
From the people I've talked to @ Ix, they're saying November.
Supermicro X10DRW-iT which is a C612.
I've tried installing via IPMI & Virtual Media, same issue occurs. I've disabled every form of USB3.0...
So as some of you have saw, I received new storage hardware.
I wanted to play around with Omni & Napp-it, but I'm having tremendous issues even...
Won't know too much until I dive more into the configuration, however, the specs on these drives is what drove me to them. They offer excellent...
I wanted to address a few questions in a separate post, so here it is:
My core is all 10GbE, with most of it bonded. We're not ready for 40GbE...
Here are the specs for the JBOD & Headunit:
- 2 x Quad-Core Intel Xeon Processor E5-2623 v4 2.60GHz 10MB Cache (85W)
- Intel C612...
"All of the above"
ZFS replication offsite.
Also S3 with versioning turned on.
I'll post more pictures / updates soon. I'm trying to play...
What specifics would you like to know?
It's finally here!
Controller + JBOD (no onsite HA, replicating offsite)
Some random stats: 256GB RAM, Dual E5, 42 * 8TB drives.
Computers only is fine.