Search results

Really weird you can select it in the bios then.

So my MS-A2 arrived last week and I'm running into a problem. I installed an Intel Arc Pro B50 but when I set the PCIE slot to PCIE 5.0 I'm getting a BSOD with the error: VIDEO_MANAGEMENT_INTERNAL If I switch back to PCIE 4.0 it works fine. Another issue I have is that without the graphics...

Hey all, someone else here created a stand which you can 3d print to use for the 4x nvme board. I also created another version which doesn't have to be screwed down but fits exactly in place:

Same thing here, curious if you managed to find out what causes this.

I tried this but still the same error.

Hmm I think you're right. However can't we make it longer then also on the other end so that it fits snug in the case such between both the bottom and top?

No matter what I try I keep running into this:

For me it seems that with your board it seems to be hanging a bit. I also don't plan to use the screws to screw it in place but rather just let it rest. Can you maybe make a picture with the stand installed to see how it fits for you?

I tried it but haven't managed to get it to work. If you guys do fix it please let me know. Everything I've tried is in this post: https://forums.servethehome.com/index.php?threads/cwwk-topton-nxxx-quad-nic-router.39685/page-38#post-389665

Hey, I printed your bracket but found I'd rather have it a bit higher since I have also installed an SSD in the x1 slot. So with the bracket the 4 nvme board is still resting on the other SSD. Next to that I had the little grabbers break off so. Would you be able to make a v2 of the model that...

Can you maybe share the CW-N100-4L-4K-nologo-230531.ISO bios? I received a BIOS from CWWK that bricked my NVME. I managed to get it working again using the BIOS posted here originally but that was actually older then my initial version.

So as I previously mentioned I now managed to get IOMMU working and attached my GPU as primary GPU to a VM. However when I boot the VM the screen of the HDMI port turns black + I can't use noVNC anymore. I would expect the output of the VM to be output to the HDMI port on the CWWK Device:

I figured it out, apparently I'm using the systemd variant for booting rather then GRUB. I thought GRUB would be the default for Proxmox but apparently not. So after updating /etc/kernel/cmdline I now see: [ 0.061921] DMAR: IOMMU enabled [ 0.144552] DMAR: Host address width 39 [...

I'm trying to get GPU passthrough to work on the N100 device. I've followed this guide but for some reason my IOMMU won't enable: https://www.servethehome.com/how-to-pass-through-pcie-nics-with-proxmox-ve-on-intel-and-amd/ I couldn't find the VT-d option in the bios, but I saw multiple people...

Apparently I've been trying to install lm_sensors all the time instead of lm-sensors. Not sure where I got this from but at least it's working now :D: root@proxmox1:~# sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +44.0°C (high = +105.0°C, crit = +105.0°C) Core 0...

That's what I tried, I'll be back at my screen later and I'll retry it. It kept saying the lm_sensors package didn't exist.

I have these setup now: This is the result of running a script a friend of mine gave me: https://tteck.github.io/Proxmox/ Proxmox VE Post Install Script

I just received mine :). I was wondering how you guys all get these nice temperature graphs. It seems thatI can't even get the current temperature as the lm_sensors package seems to be unavailable to install on Proxmox 8.0.