Search results

LOL, you'll need a 38mm thick fan running at 12k rpm to cope with this thing alone, your slim&silent 3200rpm fans will be completely useless taking into account that front intake is almost completely filled with HDDs

ok, so what did he do wrong each time?

Whole heatsink plus screwdriver already there!

Yes, 4 times in a raw with correct torqueing:

Incomplete how? You need removal instructions as well? Those instructions comply with intel recommendations Of course you can! And then you end up with reseating CPU 4 times to get all DIMMs working as OP stated

:D Check twice! This heatsink picture is from DL360 Gen10

Installation instructions are as simple as 'rotate until it stops then proceed to the next one' This socket is actually a big improvement compared to previous models. I like it because using an electric screwdriver you can install or remove a cpu+heatsink in 10 seconds and the messy part of...

Nice choice of color for GND!

Yes ASPM and gives 50gb throughput on a 56gb link, runs cool - about 5w max power consumption

Connectx-3 Pro will use either FDR10 or 40GbE on a 40Gb cable, both 64/66b encoding

is for SAS, use EMC 303-116-003D for SATA

then accept my condolences, latest update for this platform is from 2019

manual. Put the serial nr. into the search field on the lenovo support site and get any relevant resources. Besides, the server shouldn't be any different than SR630 except indicated ID

looks more like PCIe 3.0 x4 or PCIe 2.0 x8 bus limitation. Connectx-3 in IPoIB mode easily gives 50 Gb/s

Can you please give the output of Get-NetAdapterRss command in PowerShell?

Yes. Thick and heavy metal case, cheap plastic rj45 connectors, SFP cages are poorly manufactured and leave deep scratches on SFP modules. LED holes are tiny and their placement is just ridiculous.12V PSU is a noisy crap and went straight to the trash bin. But for $18 the quality is exceptional

according to feedback that particular one (without "M") definitely do:

Wrong, such external transceivers do negotiate 1/2.5/5/10Gb, but card will always show 10Gb link. The truth is this card has integrated X557 10GbE PHY, which can negotiate or be dumb depending on the present config. x550 will never negotiate 2.5/5Gb staying in 1Gb forever (unless manually...

Now that your card became too Intelligent to define the link speed on its own you need a special tool to adjust the interface

Unlike X722 your adapter does support speeds other than 10Gb