Search results

In this case it would be interesting to have the possibility to know what the business models of m2 ssd are for example! Generally in my case, I would use those to fit everyone into the case without external storage. I just hope they don't cost too much! I am currently configured with a Zraid1...

I tried to install fancontrol, but I didn't find any pwm module

For Info I updated my system by migrating everything to two SSDs in Zraid1 configuration. I found that by default the ARC RAM memory allocated by proxmox is 50% of the RAM. So I edited (and create) this file /etc/modprobe.d/zfs.conf with these lines (so I limited the ARC memory): options zfs...

Hello everyone, I'm a user who recently configured opnsense with the CWWK mini PC, I'm having some problems getting the vlans recognized by the vms on proxmox. Current situation: I have a mini pc with 6 intel eth i226 ports, so proxmox installed on it with OPNsense. OPNsense is configured with...

I put some small heat sinks on the nvme SSD, now the situation has improved. before I had more than 70 degrees peak, now I have 53 degrees peak. I also modified the small closed slot by inserting a grille to give the SSD more airflow

@fta at the top the spike is 18watt right? it is at the bottom that the spike is 14. So that means my peak consumption on the speedtest is 18watts right? Since I added the Noctua 140mm fan the processor temperature has dropped by about ~6 degrees. I went from 31 degrees on average to about 25...

ok thanKs for the info. i installed netdata on proxmox, and this below is the stats of watt about che cpu. I don't understand if the correct graph is the one above or the one below. anyway here are my stats!

Exactly, I measure using a wattmeter on the wall. Can I ask you how you measure the watts on the CPU? so I can make a comparison with you! thanks in advance!

I'm on 20 watts at idle. As ''fta'' says the case dissipates well of her. mine was a whim. But I have spikes when I run some big load on one vm or turn on multiple vm at the same time. It depends on what you use it for, if you use only the firewall and some docker that's fine. I'm at 20 watts...

As a user in this trhead I also decided to add a 140mm noctua fan on the top of the case. I am very satisfied with the work done especially regarding the fact that I managed to pass the cable transparently through the wifi hole. To fix the fan I used simple double-sided tape, so the application...

I didn't dare because I wanted to be sure of having a stable and problem-free minipc (most of us here have the 12##U). In any case yes, once you place the order just write him a message in chat with the number of orders and the fact that you want that CPU.

First of all, thanks to all the participants of this thread. With this thread you made me want to buy a unit! Oh so it was, after many months of following this thread and the nuc n100/n200/n305 threads I finally made my decision. #Start of the adventure# I contact CWWK and let him know if what...

I was just deciding to order from CWWQ given the great feedbaccks I saw here. Unfortunately however CWWQ does not ship to the country where I live now (France) So I can only order from TopTon, the latest feedback on the last v4 version sold by TopTon is not bad. The problem is the customer care...

I am also waiting for the -v3- 6 port model! I am more and more convinced to take the model with the Changwang motherboard, because I saw the section dedicated to bios on the site. Very nice, there is the bios to download and also the tutorial on how to do it! BIOS files...