Search results

OK using the same method that I put 1.10.0 BMC firmware onto the machine, using the ASROCKRACK System Management Utility on the same subnet from an M1 Mac, I have tried to instal 1.27.0 and 1.19.0 and both get stuck at Verify 1% and then after that the IPMI is not accesible until I power cycle...

Feeling even sillier now I have made the correlation that you cannot upgrade the BMC/IPMI firmware without the machine in the powered up state even though you can access that GUI option from the SMU GUI without any indication that it will stall after uploading. This is likely the same problem...

Seems the the dedicated software works https://www.asrockrack.com/support/SMU.asp ASROCKRACK SMU (Server Management Utility ) v2.8.0 on aarm64 m1 mac (conclusion seems to have made it)

impitool power status is now working fine

OK I feel silly now, after a reboot the IPMI is now functioning with the admin/admin password but the BMC web interface says that I am still on the 1.00 initial release of the IPMI firmware so the issue is that I cannot update the IPMI firware from the GUI it stalls at 100% upload I dont have...

Dear ASRock Rack Customer, Your question has been forwarded to ASRock Rack’s Technical Support Center. We suggest you to contact your dealer first for technical issues. ASRock Rack’s website also offers FAQ and CPU support lists. Some similar questions and solutions can be found there, and our...

But this also stalled at upload 100% from a Chrome latest and greatest on my mac laptop on the same subnet as the BMC 10.5.0.0/24 But this is the weird bit I cannot log in with admin/admin it wont take the password, but the login screen is present on multiple devices. booting into the...

This is the motherboard in question AS ROCK RACK ROMED8-2T https://www.asrockrack.com/general/productdetail.asp?Model=ROMED8-2T#Specifications I updated the BIOS last week from 1.10 5/7/2020 BIOS Instant Flash 8.76MB First released. to 4.10 7/10/2025 BIOS Instant Flash 11.23MB 1...