Search results

I'm so sorry that circumstances have forced your hand like this. Are you planning on offloading any hard drives? I'm on the peninsula so I'll be keeping my eye on this thread as well. I wish you the best of luck with your family's health.

Do these need to be inserted into a PCIe slot or can they run strictly off EPS power? I have plenty of open chassis slots but no available PCIe slots.

The fellow stated that he had a warehouse up in Yakima and was bringing them down that night to Kennewick (where the listing was posted). I met him at a modest residence and he had a pile of them in his garage. The entire endeavour didn't last more than three minutes, but he seemed friendly...

I can confirm that I ordered two locally last night and picked them up today. They're still sealed in the retail packaging so I'm not too worried about the contents.

Has anyone tried a fan swap? Will the CIMC get aggressive or is it just a hardware warning?

How is the remote management/IPMI on the system? I don't have any experience with Cisco CMICs outside of basic switches/routers.

Can you give us an idea of what the stock noise factor is like? I may be interested in a few of your units (I'm in the south bay).

I would kill for noise and real-world power data on these boxes. At 125 watt typical power with no modules and only three 40mm fans, I worry it wouldn't be possible to swap with Noctuas for small rooms.

Latest SPP can be found one page back in the thread.

Has anyone got noise and power data on these? Looks like a great way to condense some SC-846s but, as Fritz says, I worry they sound like a rocket launch in operation. Edit: From a prior STH post: loud.

Updated firmware version numbers on the latest SPP: Firmware Version Info Firmware Name Firmware Version Location HPE Ethernet 1Gb 4-port 366i Adapter - NIC 1.3089.0 Embedded iLO 2.80 Jan 25 2022 System Board Intelligent Platform Abstraction Data 12.02 System Board Intelligent...

Since I'm on the hunt for the network board, I might as well drum up some foot traffic by releasing a mirror of the Post-Production Service Pack for Proliant (SPP) Version Gen9.0. This is the latest support-contract-only EC200A SPP from April 8, 2022. You can confirm the SHA-256 hash as...

Has anyone seen one of the 4-port network cards for one of these lately? I'd love to get my hands on another for an HA firewall setup.

How loud are the fans with a medium load? I'm in San Antonio, NW-side and could pick one or two up.

I use a couple of SC846s with sets of Noctua iPPC 2000 fans. They have great static pressure and airflow for the noise, much more than the standard Noctua line. If you remove the default fan wall, you can ziptie three 120mm fans together in its place. For DAS chasses, you can run a second set...

In the Austin, Texas area but totally fine paying for shipping. SAS 2 or 3 and EL1 or EL2 are fine.

Reposting as it was buried and folks are asking: The 'HPE 2020.09.0 Service Pack for Proliant' was released this week with updates to both the ILO and 366i firmware. Below I've provided the firmware versions post-update as well as an open download link in case entitlement gets instated...

Can you test the voltage and amperage coming through the line when you connect it? It may be a bum power supply.

The 'HPE 2020.09.0 Service Pack for Proliant' was released this week with updates to both the ILO and 366i firmware. Below I've provided the firmware versions post-update as well as an open download link in case entitlement gets instated: Firmware Name Firmware Version Location HPE Ethernet...

I've copied a mirror for the latest HPE 2020.03.2 Service Pack in case they return to requiring entitlement. I can confirm that the iLO shows no changes in the firmware versions after updating: Firmware Name Firmware Version Location HPE Ethernet 1Gb 4-port 366i Adapter - NIC 1.2529.0...