Search results

Sent.

Hi, I have these: AQtion-esxi-2.2.3.0-esxi1.4_source.zip AquantiaAQN107-2.0.22.017.x86_64.vib net670-atlantic-v2.2.3.0-esxi1.4.x86_x64-offline-bundle.zip

Hi guys, i have Sun Netra T5220 with installed LDOM and i want to play with solaris 8 / solaris 9 installations in so called 'zones' :) The thing is, i can't find anywhere 1 of 3 packages, needed for zones to run. I was able to find these two on Solaris 10 dvd: SUNWs9brandu SUNWs9brandr But i...

if you see what's inside you will know why :)

Hi Foxyz, the details i provided are for iscsi over rdma (iSER) only. I don't know (yet) how to enable if for NFS :)

Here is also mem speed test from my brand new RTX 2000 ada 16GB SFF :)

In my case the fan below has an opening which is 3/4 covered by the drive itself. Due to that it causes negative pressure on the back of the drive hence sucking the air :) And apparently it "sucks well" :D Regarding the noise, actually the machine is not noisy at all considering how many HDDs...

I was able to low the temp to 56-57°C idle and around 60-62°C under heavy load using that thing.

I had this issue initially, try to execute CMD as administrator :)

It may not be so relevant but want to mention it. Recently i bought 2x256GB NMA1XXD256GPS (non QS) for my X11SPI-TF and they work as a charm (combined with 4x32GB DDR4 2933@2666MHz). I use the two black slots. When i tried first to put optanes in blue slots, they did not work and also some of my...

what are the temps of that 30TB drive? i have 9200 pro 1.92 and it requires active cooling (not just a small fan, but really active cooling).

ok then, so do you have any idea why SM is giving high thresholds for X557 100°C and 105°C respectively?

Hello foureight84, do you know what is the max allowed temp for X557? I also have X11SPI-TF and also X11SPM-TF and in both boards X557 is the hottest "kid on the block' :)

Hi guys, i want to thank to RolloZ170 for support :) I was able to make my X11SPI-TF to work with 8272CL using Adafruit MCP2221A

ask here :) check if module is not loaded: root@yournas:~# lsmod|grep -i iser if loaded, output should look like this: root@yournas:~# lsmod|grep -i iser isert_scst 81920 4 iscsi_scst 147456 4 isert_scst scst 3772416 3 isert_scst,scst_vdisk,iscsi_scst...

You can ignore specific switch requirements ;) Regarding enterprise feature, NVMe/RDMA is available even in 25.04, there is "workaround" how to activate it for community edition.

It is NVME (even though only SAS/SATA is mentioned) because i bought one and it works flawlessly with my p4610 1.6T U.2 drives (via oculink)

ou yes there is :) sorry about the inconvenience

What about this one? https://mikrotik.com/product/crs510_8xs_2xq_in

QNAP? :D this should be some kind of joke. Company which hardcodes credentials in their products, no way. CVE-2020-2499