Search results

i found my precious: Загрузка прошивок с HPE Networking Support [Knowledge WiKibase] such a shame that we have to do such workaround to get proper support. if someone can still lookup online and tell me if it is the latest version ( 7.1.070, Release 3507P18) or if an upper one exist. thanks.

hi, i bought this switch second handed and firmware seems to be quite old so i wanted to update it. unfortunately, HPE seems to not like end user and prevent downloading firmware without being authentified as an employe of a company even when reaching their support. could someone be kind...

do you have lot of poe? could it be a device draining more at those time?

hi, i saw some good price on a 7250. is it still a good buy if i switch my 6450 for it? only thing that stop me a bit is the power consumption difference: 25w vs 48w. any though ?

i am no expert, unfortunately for me but if we look at google: source here Changing the temperature warning level Last UpdatedJul 24, 20171 minute read RUCKUS ICX 7250FastIronFastIron 09.0.10FastIron 08.0.95FastIron 08.0.92FastIron 08.0.91FastIron 08.0.90FastIron 08.0.80FastIron...

may be put warning lvl at 100° so at least you will see it in logs.

i have already radius up and running openwrt mostly configured icx 6450 on the way so i am quite close without any additional cost :) thank you for your help and time.

i want to split my network at home so eufy/home alarm/amazon/internal stuff/work... are not mixed anymore. lan + wifi i have 2 ap with different client and Asus was lazy to not implement vlan tagging on 300eur AP. i decided to go to radius authentication so i can tag on mac level in order to...

are you sure? because if i read this: Dynamic VLAN and ACL Assignment with MAC Authentication for me it is radius that tell which mac belongs to which vlan independently of the port it is connected to.

thx for clarification and confirmation :) so most of my port will have to be dual-mode if the incoming packet aren't tag from the source but will be tagged by radius. so only my link port will be tagged for each vlan. is it the proper way to go?

i am no network expert so i was wondering if i untagged a port on a specific vlan. is it going to tag those packet implicitly or it expect the host to provide the vlan in the transmission? i wonder if i have to put authen on all my port to have a vlan allocated or not, except the uplink port ofc

i want to use radius to tell my switch on which vlan the device should be assigned. unfortunately my AP don't have vlan tagging so i am playing around with that to see how to achieve it. so far i made those command: vlan 2 name vlan-auth-default by port tagged ethe 1/2/1 to 1/2/4 ...

hi, thank you for your help. i followed the following guideline: from here if i set my group id to U:7 then it wont get any vlan, i just see 4092 and auth state no.

hello, i am bumping my head against the wall on that one... i am currently playing with dynamic vlan and took this as a template to see how to do. i have set up my radius server and so far so good. but for whatever reason the beef wont listen to it :@ the following vlan were created: as...

no idea :( i do know that my fan was being seen without issues. did you try with other Normal fan just to check?

for the 6450, you have to normally switch 2 colors (1 & 3) because for odd reason they dont follow normal wiring schemes. dunno if same for you

the thing is that : 40 MM fan with turbo jet sound are around12 CF which match 20.39 m³/h 120 MM fan with high pressure are around 72 CF which match 121,8 m³/h o_O so it will be like 6 times more efficient at cooling. i used also the 12v from my banana pi so i don't have coil whine anymore at...

otherwise you know what you have to do :D 120mm that was used for cooling artic freezer II so with high pressure. i can feel the cool air going out from everywhere :p

yes i followed through the clear instructions but didn't had a chance to go further in advanced configuration by lack of time and fight with openwrt. i also fan mod the beef because i couldn't stand the sound and coil whine of the tiny useless fan. i will definitely go deeper in that when...

it is not automatic through web? is there a write memory option as well?