Search results

I ended up buying 3 new 9G0812P1F03 on ebay, 16 € a piece with the correct PWM connector. Well, I could choose the connector from a list and they had the correct one on the list, only time will tell if it was indeed the correct one. Anyhow, worst case I know how to use a soldering iron so not...

Ha, thanks ! Too bad there are only 2 0074L4 in stock, I need 3 ;) The 082L4 are used parts, not too sure I feel confident about this, did you put used parts in your servers ?

I could not find any 0074L4 at 17 + VAT, would have gone with these otherwise I guess. Could also not find FAN-0082L4 for the 4-5€ you suggest, would be willing to do the soldering but can't find them other than on eBay for 20€ or so which is then not worth it. Where did you buy yours ?

For what it's worth: You can buy the Sanyo Denki fans alone, reference 9G0812P1F03 on AliExpress. No need to crack open the green housing then and they are cheaper that way. Still need to dremel out the piece though.

Thanks for the hint Tommy Blom, however we were discussing any potential dual port cards. 1 port is quite easy to find in PCIe 3.0 4x, but dual port for some reason is not.

I was wondering too why there would be T2 (10G RJ45) cards available in PCIe gen3 x4 available and none as DA2 (SFP+) Now however, both Mellanox ConnectX-3 and Intel X710-DA2 are available as PCIe gen3 8x. If my math and logic is not wrong, a PCIe gen3 8x card in a 4x slot will still run at...