Separate names with a comma.
There was the 1900x. (Not disagreeing with you, seems like a niche of a niche product.)
Interesting board. A compute node, with limited memory requirements, and single pcie 16x nic? I'd love to see how these are getting used.
The Dell Precision I have experience with make very little noise on normal operation. They do ramp up when loaded, but nowhere near rack server...
Looking for an inexpensive LGA 1150 CPU to test a Z97 board I have. Anyone have one collecting dust before I go on ebay?
Necro, but did this work? SAS card with SFF-8087 to SATA cables?
To continue the OT: I tried using a 43in 4k panel as a monitor. I found I could only use 1/2 of it at a time for productive work, which lead to me...
It also looks like a dual port 1.8 connector... So maybe the interposer is converting sata to dual port sas?
The one in the picture has bent pins and a bent VGA. So probably do need a lot of rework.
This is not who I bought one of these boards through in...
Aquantia® AQC107 10G? I guess at least it has 10GbE. Odd that it isnt Intel though.
The EVGA SR-1 seemed to have started this board segment. Asus has made a similar layout of board for the last few generations of E5 V1-2 & V3-4. I...
Gamers Nexus showed an early EVGA (SR-3?) board that looks more like a workstation board. Front to back layout. Single PSU. Still 1DPC. Less...
Three of the PCPer guys also joined Intel this year.
Are those memory restrictions not just AMDs?
Since the CPUs are not locked down, hopefully memory freq (and timings) will be user settable.
IF is still there between the two CCXs on the die. Look at the Ryzen 7 chips to see how much memory speed effects inter-core latency on single die...
Sticker makes me think it is a reliability sample.
"Patrick was last seen: Yesterday at 11:00 PM"
SSDs have already eclipsed HDD at density, but normally at 10x the cost. For lukewarm storage HDD still makes sense.
Looked it up, 9302-16e. 30W, so only need the power if you put it in a 25w PCIE port.
Do these pull more than 75W? Or is the 6pin only needed if it is put into a 25w pcie port?