Separate names with a comma.
Thanks yes I saw that thread but it only refers to standalone or Unleashed firmwares, however nothing about ZD firmwares unfortunately. I...
So I went a little nutty trying to diagnose some Unifi slow wifi issues I've been having and ended up with a R720 and ZD1200. Initial testing on...
They're working in my Supermicro X10SRL-F and E5-1650 V3. They show up as 2133MHZ UNKNOWN SRx4 32GB RDIMM in BIOS with all the ECC options present.
Their listing explicitly states it works with E5-2600 V3 with newest BIOS that supports V4
Why not E5-V3 + C612? My board X10SRL-F shows it accepts upto 128GB 3DS "LRDIMMs", but I'll find out shortly when my set arrives :S X10SRL-F |...
It seems esxi dropped sr-iov support for these as they are no longer using the mlnx-ofed driver. This could be the reason they’re being dumped for...
Glanced at the subject and thought what the heck is a Freenas Minion, is that some kind of stocking stuffer? :p Difficult to see specs on this,...
Bought 3x Sunon 6.3 cfm maglev to put in a 6450-48P from Amazon but one was defective. Out of curiosity I left it running with only 2 active fans...
Went in for a Brocade switch :D
Entire cart as long as same currency.
fwiw I bought from them (streakwave) and didn't have any issues.
@compuguy their site doesn't like the referral link. Copy and paste the url into a new clean tab and it'll download. My switch: System...
Also keep in mind the beta units had issues with the Base-T ports and need an RMA to get a fixed unit with a newer PCB.
Yes 10G copper all resolved now and older units are covered by warranty. I am connecting mine to a different switch XS708T, and also to my Xeon-D...
They fixed the US-16-XG platform wrt 10 GBase-T links. They're now on to board revision 13 (launch was 4). US-16-XG is configured by Unifi...
Is it the PCB that's failed or the panel that's failed? DisplayPort Controller Board For 27 inch LM270WQ1 SDC1 LM270WQ1 SDC2 LM270WQ1 SDC1 SDC2...
Yes, it runs fine with no faults, granted my load on it is very light with only a few 'clients' on it at a time, and very infrequently under...
TPLink T1700G-28TQ 24 x 1G + 4 x SFP+with S+RJ10. Fanless. XS708T is a nice switch already at stock, but noise can benefit greatly from a fan...
I've been using a cheap Dahua 4431 with BlueIris (used for home security as well, so baby cam was easy to add when needed). The new UI3 web...
IMO get a Nest Protect and use IFTTT. They're a little more pricey than ZWave detectors but the stock app is decent. They use regular mains...
