Separate names with a comma.
I haven't used the fio script on different boards yet but now I know about it, I can. Yes, these results were from a mdadm raid 1 array. That...
Thanks a lot. I ran 4k, 128k, 1m and 2m blocks to see and the performance seems pretty good actually for 128k , 1m and 2m at least, 4k is low for...
Thanks. Do you know an example fio command I could use to use that config file? I Googled about it but can't find anything that suggests how you...
I've tested the bare drives relatively recently and got slightly better performance but not much at all, still below 1GB/s write speed. I'll have...
I checked which PCie slots I'm using on the X9DRI-LN4F+, slot 1 and 6 which are on different CPUs so it rules out using two PCIe slots on the same...
Thanks for the idea. I checked the output of "lspci -vv" and it seems to suggest it's PCie 3.0 okay: 82:00.0 Non-Volatile memory controller:...
That'll be very helpful, thanks a lot.
Thanks, much appreciated. I'm actually primarily testing another X9DRI-LN4F server I have with 2 X 2.5" Intel P3605 1.6TB in it. The two devices...
Do you get the write speed you mentioned with the following command, if it's not what you already used? dd if=/dev/zero of=test_$$ bs=64k...
I could only dream of seeing such numbers. My NVMe seem sufficiently cool as they usually stick around 20 - 30c. Anything special with...
What sort of read/write performance have you seen for NVMe on Linux with X10 or X11 boards?
That wasn't something I knew about. Although I did use the single M.2 slot on a Supermicro board for one of the tests that was getting poor...
That's what I thought but I've seen consistently massive performance differences between the same NVMe SSDs on both Supermicro and ASRock (and...
Hi I've tried different NVMe SSDs in various Supermicro motherboards. both in the M.2 slots on the board and using a M.2 to PCie adapter in the...
Yeah, then you've to add the motherboard height (pcb) plus the CPU socket and CPU itself so I guess all of that adds up. I'd assume everything is...
Current heatsink is 26.5mm in height, seems the absolute limit for 1U is 29mm (according to Scythe Kozuti Low Profile CPU Heatsink |...
It does in deed, I'm able to get it to lock all cores to just below 4.7GHz.
I just found The Intel 9th Gen Review: Core i9-9900K, Core i7-9700K and Core i5-9600K Tested which states i9-9900k power usage at max load (turbo...
Interesting. I also run an i7-8700k server with this exact same config, it's also 95W TDP but it has no issues running full load so I figured the...
The TDP is the power consumption when all cores are running at the base clock, it doesn't include turbo speeds. I believe this CPU gets up to...
