Search results

https://forums.servethehome.com/index.php?threads/qotom-denverton-fanless-system-with-4-sfp.41331/post-472200

If you want the latest revision, Qotom sells Q20331G9 V1.2 C3758R on their AliExpress store. However, I'm not sure if their new cooling solution is an upgrade or a downgrade.

I use this battery tester to check all kinds of non-lithium batteries. Very simple and reliable little tool :)

Why would you assume that? Did you over-volt your MS-01 CPU via BIOS settings? The degradation you're referring to is associated with desktop 13th/14th-gen chips (like the Core i9‑13900K/F variants), which can operate at higher voltages. i9-13900H is a voltage-limited laptop CPU, so if it is...

QNAP QDA-U2MP uses the same ASMedia 2812 chip and it didn't hang on me yet, so the issue is probably not the chip itself. If you suspect that the thermal solution is not adequate, you could point a fan directly on the heatsink, to see if it solves the issue.

Do you intend to use this SSD as just a drive or as part of a RAID? If I understand correctly, a RAID pool speed cannot exceed the speed of its slowest drive. So if you do use it in a RAID, the entire pool will be limited to PCIe 3.0 x1 speed. Feel free to correct me on this one.

When you connected an NVMe SSD to the M.2 E-key (WiFi slot) did you get PCIe 3.0 x2 speed or PCIe 3.0 x1 ?

Did you try turning off this VM and rebuilding it from scratch - new VM, not a clone or from template?

Secure Boot was developed to protect the UEFI from firmware rootkits, not any malware that runs within the OS. It is a security feature that is transperent to the end user, but can be an inconvenience to admins. In this case, reinstalling the OS requires temporarily disabling Secure Boot.

I replaced the pre-installed OEM RAM with a Crucial 96GB kit, but the MS-01 failed to POST. There was no video output, no access to the BIOS menu - just the blue LED and CPU fan powering on. I switched back to the OEM RAM and replaced the motherboard battery, but that did not work so I had to...

I have 2 units running Proxmox for about 10 months. Had to replace one of them after new RAM caused the MS-01 to stop POSTing. But I still use 2 MS-01 units and don't intend to replace them any time soon. The true reason is value. Simply put, there is nothing with that level of performance...

Thanks for summarizing the steps in this procedure. Looks like it's going to be a journey :)

It is indeed a GPON. Specifically, my ISP provides clients with a NOKIA G-010G-P media converter. I read an online article, showing how this 2.5G Fiber Optic Media Converter + a GPON ONU can replace my ISP provided media converter, to achieve >1G WAN. And yes, according to this article the...

Can anyone recommend a NIC that supports 2.5Gbps fiber SFP modules, like these ones? https://www.aliexpress.com/item/1005005928774396.html https://www.aliexpress.com/item/1005006308599564.html

I'd like to throw away my ISP's media converter, and use my home-lab PC as the internet gateway instead. To do so, I'll need a NIC that works with a 2.5G GPON OLT SFP Module. There is a video on YouTube showing this exact setup, achieved by "Chelsio 110-1146-40 T420-CR T420". I'm sure there are...