Separate names with a comma.
Well, I had a good experience about 9 or 10 years ago.
I found a 24U cabinet listing and bid 24$ for it. Local pickup.
Did it for fun mostly. Not...
Thanks. Just got one in mint ,supposedly, condition. Will see when it gets here.
The issue they jumps out for me is that your existing hardware is very diversed. When you run a HA cluster all nodes need to be as close in config...
Thanks. I figured I will look at samsung first anyway. Just bid on one at 415 right now. Will see.
If I can get a samsung note 9 or huawey p30 pro for around 450$ for us market.
What is the better choice.
As it is they both fit my basic criteria...
Execept for ESXi or maybe Proxmox I wouldn't use any others on usb disk.
ESXi is thr best contestant as it is run mostly in RAM once booted.
What is the problem here?
It looks like a standard pc power cables.
They will work for anything.
Yes usually servers come with a thicker cables....
Just want to update.
Found an ubiquity AP on eBay.
It is an older model so needs the controller to configure and run. But works. Spend almost a...
Not sure what is that case but try Rackmount Mart - 5U Rackmount Chassis
Yes the wndr is access point only. No routing no dhcp. The reason I wanted a router capable being an access point is that I only have 1 network...
Here is my issue.
I am in USA.
At home, I run a pfsence setup from the ISP to switch. For wifi I use netgera wndr3400 in AP mode....
I would say, first of all forget sbs2011.
It is not supported anymore.
If you want hyper-v. Winaserver 2012 and up is the only supported OS.
A little update here
I have tried to setup aria2 in Proxmox based lxc container.
For the love of all holly could not make it work. Followed 6...
You do not need to reconfigure them.
I assume that you had a separate os drive and 2 data drives ib zfs raid1.
If that is correct than just...
Is it still available? I just want to know the cost of getting it. If it is within my budget would like to get a second machine for my setup.
In that case the issue is with your 19".
Possibly a strange default resolution that is not supported by the cards.
I had seen monitors from Dell...
I was thinking about it but I just expand the OS drive of container. It's the same storage.
Transcoding in emby is not the issue.
I know it is...
Set boot to auto and try cards in different slots. Based on what I found the slot may be incompatible with card or off.
Disconnect the had and try...
Thanks. I actually found this script and plan to adapt it if I can.
Here is the gist of my issues and plan of attack.
Issue 1. My...