Search results

I couldn't rollback bios to 2.0 so I couldn't get it to post in H12, I use this CPU in MZ32.

I was finally able to post this: ❗️ I didn't post on image.RBU but I was able to post on Milan.RBU. It took a while, but I finally confirmed that it works. Thank you so much ❗️

I flashed BMC to the latest yesterday and now I can log into BMC: ❗️ I have a question with the bios file you gave me. Am I correct in understanding that the image flash_R.ROM is only for R26 for Rome, and for Milan and Rome use image.RBU in RBU or image.bin in SPI_UPD❓

Thanks for the reply. I appreciate the kindness of both of you. I'll try the bios update after work today: ❗️

Thank you! I was able to download it. Thank you very much for your kindness.

I'm trying to access it from here, but no matter how many times I try, I keep getting an image error. If you don't mind, could you please send them to my e-mail address, so that I can send them to you.

I have tried several times, including changing browsers, but I keep getting an error message that the file cannot be found.

Thank you for your response! The file did not seem to be in the link. If you don't mind, could you upload it again? The BMC did not pass the PASS that was attached to it, and when I checked with the seller, they told me to reset it. I will talk to GIGABYTE about resetting it first.

In the end, we did not send the H12SSL to Asrock, but bought a used mz32-ar0 rev1 and are trying to see if Milan ES will work. After gathering information, it seems that the bios containing milanpi 1.0.0.1 that you mentioned is in MZ62, but I could not find it in mz32-ar0. Asrock, like Super...

Thanks to your help, I was able to obtain 2.1 and 2.0. First I tried updating 2.0 with BMC, but it warned me that it could not be rolled back, so I put in 2.1. 2.1 could not POST milanES, so I tried 2.0 with UEFISHELL, but at the last minute I got an image warning and could not downgrade. I...

Thanks for the information! I've been looking into the H12SSL bios for a while now, but I couldn't find any information about it working with 2.0, so this is very helpful! I've been on 2.4 since I bought it and supermicro says that if you update to 2.1 or higher, you can't roll back to before...

I asked the sellers but they apologized for not being familiar with it. I searched for information and found a similar case on this forum, so I am writing to you. Thanks for your kind advice.

I see...you mean it may not work with ROMED8. I also have H12SSL I, but I have not tried this one yet.

Thank you for your reply I currently have the 7402P on and it is working fine with bios 3.2. Is there a big possibility that this milan ES is broken?

Hello, I have an EPYC Milan ES ( 100-000000114-09 )and ROMED8-2T. I set up the Milan ES and tried bios 3.4 and 3.2, but DR DEBUG showed 00 and I could not post. If anyone knows of a bios that works with Milan ES, please let me know. Thank you in advance.