Search results

Too bad, get a 826 if you have a chance then, their backplane offer are so flexible that run up to nvme u.2 now.

Well, at least now you got an perfect excuse to solve both problem, get a new SAS3 EL1 backplane, ONE Sas cable and that's it.

Yeah, no need for an explaination, an accient $60 X9 just to prove your concept, good enough for us, we're all there. Go for it :D

Very good point actually, with the present of U.2 in sff as same as 2.5"Sata drive, OP can skip through 2.5 "Sata and 2280/22110 Nvme with minimal effort while maintaining hot and slow tiers respectfully, keeping the setup much much simpler imo.

Ah, nice thing, and people laugh when I brought home a SM 847, please :D

From my experienxe those PDB (ie 825 and 826) are interchangable, the main different in them should be the output plug, some got more PCI 6pins or PCI 8pin, could not remember which is which. I was in the same situation as you when running various 825 and 826 chassis(s), I love those, they are...

It have Sas3 backplane alright with expander, using 2 set of 8643s connector, could not remember how many but definetely 8643. I got one of 2-rear bay cage for boot disks and remember connecting them to the main backplane. The chassis is in my storage right now, i have too many thing going on...

Got one in storage, havent got time to muck around with them yet. Backplane is Sas3 I think. From my view, they are actually using same mainboard as RH2288v3, and the 1u version 1288v3, there is 2 big threads on STH about them. Dont know how much would be a good deal for you, but from where I...

Last time, my R730xd throw that many errors, after multiple attemp to heal it (diagnostic, update various firmware, remove/changing components....) The board just shit itself after a week. Lucky me R730 is dirtcheap 2nd right now. I would suggest you start eyeing for a replacement board just in...

Resurrect an old thread incase anyone running into it in the future. Got 2 gen9 server, ML110 and Ml150 have same problem with fan speed at 100%. ML110 was like that since I accquired it, an ILO update solve the problem. Ml150 was firmware updated and running fine for a year without any problem...

Great find. Regarding the downstream port, they're probably for 2 bay 2.5 rear mount boot drives, think I have them last time I bought random thing from Taobao.

Get a small pryer like the one doing mobile phone and muck around, Im pretty sure I was able to take all of the fans out of their white casing for cleaning before. I owned several Super 8x6 8x7 case and I think all of them can be done.

Got that exact case you are asking in the YT video so any questions fire away. I 'll try to answer the best I can. Something on top of my head. Pro: . The 12 bay Aliexpress case certainly is not cheap, got mine close to 200USD + shipping. Unlike majority of them, the case is well builded...

Yeah, the plug bit is just the holder for the extended cable, kind of flimsy in the original one, personally I woudnt be bother, just using a longer fan cable, they are at the back so very easy access.

Hey, you are in my exact position couple months back. There is a guy that have been doing all the hard work which included the fan bracket, and generously share his designs on SC846 so here you go. https://www.printables.com/@twang_1374464/models

Time to an all flash nas upgrade then, in 2.5" sff of course.

That M910x Nas is awesome, would love to get my hand on one. The most extreme of Chinese modding I owned is a M910q with the i7 9850H laptop chip and soldered on 2nd M2 Nvme slot like the M910x. That tiny Nas would be another level on its own.

A few things would required when I tried to put an i7 2600k in the M73p. First should be changing the power brick to more than 90w or the board wont POST at all. 2nd should be the cooling, back in the day the i7 4th K running hot even in the desktop enviroment. Otherwise you good to go.