I have an MS-01 that I've been trying to get better temperatures from and now I'm really stumped. In the plot below I pulled the heatsink and replaced generic PTM7950 pads with Artic MX-4 thermal compound on the 23rd as that has worked well for me in the past. I just assumed I did a bad job and...
I have two dual TPU coral cards that I bought because the single A+E coral was unavailable. I knew that both TPUs wouldn't work in almost all A+E slots, but assumed I could get at least one to work. In my Beelink EQi12 that is the case. I installed the card, one TPU showed up in Proxmox, and it...
I'm getting 62 watts at the wall according to a "Kill a watt" meter from a Ruckus ICX-7150-48zp with one power supply and one fan module with nothing connected and an essentially blank config. It's running 08.0.95r.
Thanks for the advice. I've been away from SNMP network monitoring for two decades and spent some time digging into my past preferred solution (no need to name it). I have to say LibreNMS has a lot to offer over what I used to use. I've yet to tie it into Influx. Based on the native interface...
I working with a new to me 7150-48P that has Fastiron 09.0.10fT213 installed and I'm trying to get the web interface working to access some of the views. The configuration is setup with "web-management http" and "web-management https" enables. I'd like to disable http but it is enabled for...
Does anyone have an intro to getting SNMP set up on a Ruckus 7150? I'm looking for read access for monitoring but also write access to control POE.
Thanks!
I recently acquired a few 7150s, specifically a 7150-24P and two 7150-C12Ps. None of the units included rack ears.
For the 7150-24P I used the "PhyinLan Rack Mount Kit Universal Adjustable 19 Inch Rack Ears for HP/ProCurve/Aruba/OfficeConnect/HPE and Other Switches". They are not a perfect...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.