Search results

  1. K

    Lenovo 930-8i: Don't crossflash this.

    Hello everyone, I've read some crossflash threads - flashing 530-8i and crossflash thread : https://forums.servethehome.com/index.php?threads/lenovo-930-8i-to-broadcom-sas-9460-8i-sas3508.22404/ Anyway, I think every thread ended in failure; but I tried, because I have two same cards...
  2. K

    Guide for using Niagara 4.3 to set 12g speed in firmware limited HGST sas3 drives

    Nice manual! Thanks. Niagara GUI is user-friendly but requires too much tasks before running... so I write simple script - using some sdparm command line. This script changes Max negotiated link speed param [0x19, 0x01 offset 0x29 and 0x59] (0x0A) to 0x0B. literally same work with Niagara gui...
  3. K

    Tyan KVM HTML5 Remote Console not working on Chrome-based browsers

    I have FT77D-B7109 GPU server, BMC v7.0 fw, HTML5 KVM works well in latest chrome. Which Tyan model are you use?
  4. K

    What's your favorite ONIE-installable NOS?

    Hello, i have one celestica D2020 switch. installed os was Cumulus linux 2.6.x. but cleared u-boot environment variables mistakally; so switch can't boot to OS. i wants recover this but no much information about this switch. D2020 switch uses RAW NAND flash filesystem so most SD/SATA disk...
  5. K

    Crossflashing Intel RS3DC080 (1GB Cache) to SAS9361-8i

    Hello, I'm trying to change the Intel RS3DC080 to Broadcom SAS 9361-8i card. when I changed IBM M5015 to DELL PERC H700, it's was simple (use megarec to Write SBR, clean flash, m0flash firmware) . but SAS3108 chipset is looks different to SAS2108/2208. backup the original SBR (RS3DC080)...
Top Bottom