Search results

Though they are Netapp part numbers they don't appear in the list when searched, for me anyway.

Should be it https://www.dropbox.com/scl/fi/hfbb9gc5dy7wu5nw6p1ug/Samsung_PM1633A_LC_3P02.bin?rlkey=avoa0lrje04iih2udb64yumab&dl=0

The heat the drive is generating may be a factor as all tape drives should have some cooling. Firmware updates rarely fix LTO issues especially with read and writing. Maybe the tape has snapped? The drive logs may tell you more.

What do you mean it doesn't work?

thought so, just hard to justify the cost.

Have you come across a card that has hot plug on all slots yet? I haven't seen a PCIE4 card yet

i doubt it will let you

The drive doesn't give you a number ? oh yeah its an hp drive. the tape leader may be off.

what happens if you power the drive without it plugged into the sas.

doesn't the PERC card have secure erase option?

When using the 9500-8i, will non Broadcom cables work ok when its in SAS/SATA mode. SFF-8654 to 2x sff-8643

I recently took a punt at one of these server chassis. So far so good no issues other than cooling the SAS HBA, just need to sort out a better cooler for it. Not cheap but it has got a SAS/NVME backplane which is what i needed.

yeah maybe. well at least it works, cheers for replying.

So i removed the board, tried another one i have. that booted fine with hp memory. then put the original back in and that boots as well lol.

I just have a Xeon Silver 4114. i have tried these models, both have supermicro on them. MTA18ASF2G72PZ-2G3B1 M393A4K40BB1-CRC0Q No matter what i do it fails. maybe its the board. i have another supermicro board that is happy with hp memory.

Hi Has anyone found memory that works on this board that isn't on there supported list? Or is it that picky? Cheers

Yeah mine the same as yours, i have 2 though. bus 4 and 8 Cheers for the help, there's always something.

Im using a Ceacent controller for NVME drives. is there a reason when plugging in a drive it doesn't auto detect it, every time i plug and unplug a drive you have to scan bus in device manger.

So this is like Protection information/Data assurance

Yeah it sounds like you just connected a server to another server