Search results

I am experiencing the same issue. Did you ever get this resolved?

It worked, thanks again!

Your awesome. I was able to update to 2.33.5100 using the link you provided, however card is still referencing QCA and not FCA. Is there something else I need to do? Device #1: ---------- Device Type: ConnectX3 Part Number: MCX353A-QCA_A2-A4 Description: ConnectX-3 VPI...

I purchased them on eBay from g-electronic showing a Chino, California location.

Just tried it with the bin you linked and same result. Burning FS2 image failed: Device/Image mismatch: FW image file cannot be programmed to device ConnectX-3 A0, it is intended for: ConnectX-3 A1 only

That is a fair assessment. Since I'm using the correct file regardless of .bin or .mlx do you know why I am not able to flash this card?

I followed the steps in this post: https://blog.swineson.me/en/mellanox-connectx-3-firmware-flashing-and-configuration-for-both-ethernet-and-infiniband-in-2021/ Downloaded bin from Mellanox site, changed the ext to mlx per the instructions and then verified the firmware and got OK's down the...

I ended up purchasing two of the above cards. When attempting to flash to either FCBT or QCBT firmware I get "Burning FS2 image failed: Device/Image mismatch: FW image file cannot be programmed to device ConnectX-3 A0, it is intended for: ConnectX-3 A1 only." Wondering if these aren't Rev A2...

I used "flint -d mt4099_pci_cr0 -i .\fw-ConnectX3-rel-2_42_5000-MCX353A-FCB_A2-A5-FlexBoot-3.4.752.mlx -allow_psid_change burn." Tried both "fw-ConnectX3-rel-2_42_5000-MCX353A-FCB_A2-A5-FlexBoot-3.4.752" and "fw-ConnectX3-rel-2_42_5000-MCX353A-QCB_Ax-FlexBoot-3.4.752" Both firmwares gave the...

Device #1: ---------- Device Type: ConnectX3 Part Number: MCX353A-QCA_A1-A2 Description: ConnectX-3 VPI adapter card; single-port QSFP; QDR IB (40Gb/s) and 10GigE; PCIe3.0 x8 8GT/s; RoHS R6 PSID: MT_1120120018 PCI Device Name: mt4099_pci_cr0 Port1 GUID...

Hello, I purchased two MCX353A-QCATs on eBay both showing Rev. A2 on their stickers. They both show FW Version: 2.10.0000 with PSID: MT_1120120018. When I try to update them to the latest FCBT firmware I get "Burning FS2 image failed: Device/Image mismatch: FW image file cannot be programmed to...

Hello, I have the opportunity to get two MCX353As for $40 total. I'm looking to connect my server and main pc through DAC and hoping they can run at 40gbe. I can't seem to find any specific info on this QCAT version. I am under the understanding that QCBT, TCBT, and FCBT are essentially the...