Search results

RUCKUS Unleashed 200.18.7.101.244 out today. small numerical version change from *.242, Associated release notes list nothing new or resolved.

Resolved Issues in Build 200.18.7.101.242 • Unleashed (200.17.7.0.152), resolved an issue where Wi-Fi Calling on Apple devices would experience dropped calls or one-way audio when roaming between access points. [ER-15088] • Unleashed (200.18), resolved an issue where TLS encryption with the...

Small release seems mainly for Apple devices. Resolved Issues in Build 200.18.7.1.323 • Unleashed (200.17.7.0.152), Wi-Fi Calling drops or experiences one-way audio on Apple devices during roaming between access points. [ER-15088]

VyOS poorly communicated the shift from the old model coupled with radio silence (and at least a couple maintainers posting like a negate owner) and a delay in the first Stream release, which allowed in some legit suspicion and rumor that the end of homelab use was near. The first stream release...

Another minor firmware bump was released today trying to fix the Apple bugs introduced in the initial 200.15.* RUCKUS Unleashed 200.15(MR) Refresh Release Notes Resolved Issues in Build 200.15.6.112.54 • Apple devices having roaming issues after upgrading to Unleashed 200.15 MR. [ER-13584]...

Web interface is not good (convoluted, poorly played out, has many options hidden or options not applicable to a specific switch) or reliable and really should not be counted on. Also little to no support can be found online from the company or here/reddit type users. But you should be able to...

the R series antenna pattern is optimized for ceiling mounting not wall mounting, unless I mistaken. I think the H series is for wall mounting.

RUCKUS Unleashed 200.15.6.112.52 minor version release for those Apple users still on 200.14 due to the regression in the initial 200.15.6.12.304 release. new feature : add R350e AP support resolved: HomePod Minis are unable to connect to the Unleashed network after upgrading to Unleashed...

I have a similar Boot Code version on an icx-7150-zp using SPR09010j.bin (UFI), Version:10.1.26T225 (mnz10126), curious why you think this incorrect? BTW Ruckus released a minor update RUCKUS ICX FastIron 09.0.10j_cd1 (GA) Software Release (.zip) you can try.

Ruckus Primer: Ultimate AP Reset Technique without WebUI Saw this on reddit, could be useful for someone here. The setup tftp server section is sparse, but Fohdeesha has us covered here. Setting up tftp: Windows, Linux, macOS Fohdeesha

I would add for those doing this on proxmox to install pve-headers instead of linux-headers-$(uname -r). https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/post-626516

Rack mount has a fan underneath, last 5-10secs vid, and vents on either side, which I assume takes the place of the chassis heatsink (but no fan) of the original model.

I use a lot of Homekit over thread and Matter over Thread devices with Unleased and no issues once at least directed multicast is disabled on the SSID and ETH ports

Or you can ssh into the Master AP and use any of the following below you want to try: enable ap-mode set qos igmp_query v2 enable set qos igmp_query v3 enable set qos mld_query v1 enable set qos mld_query v2 enable set qos eth0 mld enable set qos eth1 mld enable set qos eth0 igmp enable set qos...

Unleashed-200.15-WhatsNew.pdf

Ruckus has acknowledged a 200.15.6.12.304 issue with HomePod Mini's, I have the same problem with larger HomePod Gen2 as well. https://community.ruckuswireless.com/t5/Unleashed/200-15-Unleashed-HomePod-minis-cannot-join-the-network-after/m-p/74604/highlight/true#M5696

I reverted back to 200.14.6.1.203, none of my apple HomePods (mini or Gen2) would connect after the upgrade. They connect fine with the former on a wpa3 network, but would not connect to wpa2, wpa3 or combo wpa2/3 networks on 200.15.6.12.304.

@Patrick did you test the the SFP+ ports with any linux distribution using kernel 6.*, including Proxmox? They work in FreeBSD based systems (*sense). I have a similar system and the intel x553 SFP+ does not work in Proxmox 8.*, latest ubuntu or VyOS 1.4 reported in Bug 5103 – 5103 – intel...

Check out the post from @fohdeesha back in 2018 in regards to the FastIron 08.0.30 dhcp server implementation. https://forums.servethehome.com/index.php?threads/brocade-icx-series-cheap-powerful-10gbe-40gbe-switching.21107/post-206144

r770 Ruckus goes wifi 7 and adds Matter/thread (though likely locked up behind $$$ licenses). Should work with unleashed as well. Probably more notable for the potential 2nd hand r*50 APs that will hit the market as enterprise updates. Also sounds like they made additional efforts to lockdown...