Search results

I believe they are planning on adding rebar support on a future bios update

H13DSG-O-CPU-D is proprietary to their systems, also 2p Won’t give more lanes its still 128 lanes

Ahh i see your point now, good to know. Hopefully your board is still under warranty?

Is this revision 1.02? they moved those chips to the underside of the board In your picture it just looks like some damage to the chips physically which might be why its overheating now

Check the U4 U5 U6 chips to see if theres been any damage. They get damaged easily when installing and removing any AOC. They fixed this on the board revision 1.02

try reseating the cpu?

I do not believe there is a raid capability across the m.2 slots. Would need a m.2 raid controller aoc.

MCIO will be able to hold 8 Sata Drives depending if the boards connector will allow for SATA.

You will need an AOC sas controller if you want sas drives for this board

Naples processor will not work with h12 generation sp3 socket MB

I would like to know this as well. It seems like this unit is hard to come by. Maybe someone here has tried it. I’d assume Supermicro would designed their Heatsink based on AMDs spec (possibly the 4U-P42). Performance shouldn’t be to far off.

I Would just recommend the SNK-P0064AP4. You can find it on Supermicro’s Estore website should be able to handle up to 280w TDP

I Believe that the 9665V-S is supported for intels TXT. AMD platform does not have this. I think you would need the plain 9665V version.

This can possibly be anything. Does The heartbeat light come back on after removing the GPU? Is IPMI accessible at all?

I believe the cable should be the cbl-sast-0953