Search results

0.00612429

Is there any way to overclock RAM on the supermicro h11dsi rev 2.0 / 2 amd epyc 7551 platform?

As a power supply: https://www.gigabyte.com/ru/Power-Supply/GP-AP1200PM

5v needs to power the SSD drive, is it possible to connect 5V via pico power supply?

The 2u enclosure is used, the 1u power supply was chosen because it was decided to experiment.

The system consumes 800-900 watts for 10 hours. There was an "ExeGate ServerPRO-1U-1200ADS 1200W power supply unit", this power supply unit could not work with a consumption of 780W for a long time due to a cable malfunction, at the end of its shift it simply stopped turning on the system. The...

Which power supply unit will work well in an 800-900w system 24/7?

Windows 10.

The processors are overclocked to 3.0 frequency, they have been loaded at 100% for a long time, the cooling is good because the sensor shows 48-65 degrees Celsius. There are 16 RAM slots, error correction functions are enabled and the encryption function is disabled. The processor power system...

How much W load can the supermicro PDB withstand? "not all supermicro PDBS" are suitable for Supermicro PWS-1K21P-1R? Maybe it's better to buy "IBM BladeCenter DPS-2000BB" / "IBM BladeCenter DPS-1600BB", power the motherboard + ssd drive from "pico psu", the processor from the power supply.

1200W ServerPRO-1U-1200ADS 1U Is this option suitable? The maximum load on the power supply will be 900 watts (the system will consume that much). Is it possible to improve the cooling of the power supply by installing a fan with a diameter of 60 mm instead of the standard 40 mm?

PWS-1K02A-1R, Supermicro 1000W 80 Plus Titanium Switching Power Supply How to connect it, this unit does not have a 20pin + two 8pin cable, how can these units be used for supermicro h11dsi rev 2.0?

Supermicro 1280W PWS-1K28P-SQ Is it a good option?

"supermicro's 2u 800-1000W Titanium 80+" Does this power supply have 20/24pin cables and two 8pin cables?

Is the Exegate ServerPRO-2U-1000ADS with a power of 1000 Watts not a bad option? The atx format device is poorly compatible with the 2u server enclosure?

I connected the 750w power supply, on the 750w power supply the system stopped going into a power outage. The consumption of the system is 589-595w at a frequency of 3.0 and a voltage of 1.006. Which stabilizer is better to buy?

It turns out that the power supply cannot withstand? Previously, the power supply could withstand overclocking, now even the standard mode is unstable, even with automatic overclocking. It turns off anyway when the processors are loaded at 100%.

The problem here is not simple, if it were a case of "TjMax" then I would have seen it in bmc.

Even disabling overclocking does not help when processors are running in "auto/standard mode"

Accessories: Supermicro H11DSI REV 2.0 based on two AMD EPYC 7551 processors 16 blocks of RAM with a frequency of 26666 and a capacity of 8 GB each Processors are cooled by water cooling. A 900W power supply unit. A 128 GB solid-state drive. Server enclosure B206L-B-0. The power consumption is...