Search results

Yes and my QYFS run all time on high performance mode in windows and with disabled any power save function (full time +- 2.5GHz-2.6GHz and more). I know that SST is crazy overprice but works very well. It's all about money. Good Noctua cooler will be good too. :)

For example my one QYFS with SST-XE360-4677 never go over 60c.

For first time I used only 1x Samsung 990 Pro 4TB. Now I have in card 4x Samsung 990 Pro 4TB. Because I have very good experience with Samsung SSD (I was not owner 840 SATA :-D) so I stick with SSD from Samsung, so I will be upgrading to PCIe5 but Sam must release drives for ver5.

Micron one stick 1x64GB 8000MHz RDIMM This kit I have twice and works it without problem. I can recommend this set.

For example my setup, thanks @RolloZ170, my setup run with 8x 16GB 6000MHz Kingston Fury Renegade Pro DDR5 RDIMM and I can't complain about anything. And when the new modules from Micron (64GB 8000MHz RDIMM) will be finally available in my country, I want to buy a few and test it.

As CPU cooler I using and I recommend SilverStone XE360-4677. I using my SilverStone XE360-4677 with my QYFS and as fans Phanteks PH-F120T30 and it is super combo. But as Civiloid said, this cpu cooler is not cheap.

My ASUS PCIe 5 NVMe Card works without problem. As fans I switched from Noctua NF-A12x25-PWM to Phanteks PH-F120T30 and it is little better with better temperature. But soon Noctua will be releasing newer versions fans Gen2 so I not know if Gen2 will be better or not, for me are now Phanteks...

Great choice. I have this board and is excellent. You are lucky that Asus has a store in your country. In my country motherboard costs same amount from day one.

Yes. Test it with benchmark before and after. I don't want to be the bearer of bad news, but I think the settings in the ASRock app don't apply, but maybe it's just my imagination.

I tried with my QYFS EVGA RTX 3090 Ti FTW3, ASUS ROG RTX 4090 OC and both gpus have problem with 103 and more. This is standart situation. If you want go higher than 103 you must using older gpu.

I using ES QYFS and without any problems too. My disks NVMe via ASUS PCIe 5.0 Card and it's perfect.

https://www.intel.com/content/www/us/en/download/765502/intel-quickassist-technology-driver-for-windows-hw-version-2-0.html

I'm still hoping that Intel will release at least a few top tier pieces EMR W, but it doesn't look like it.

For me works fan control in w11 without problem. Now with 4x Phanteks PH-F120T30 (and before with 9x Noctua NF-A12x25 PWM). Fan headers on motherboard plus fan hub Noctua NA-FH1 and app. I tried many apps, from Asus up to Fan.Control. And in my eyes is best of the best: The first setup is a...

https://www.micron.com/content/dam/micron/global/public/documents/products/product-flyer/128gb-ddr5-rdimm-product-brief.pdf Specification Data Rate 8000MT/s Nominal Voltage (VDD/VDDQ/VPP) 1.1V/1.1V/1.8V Burst Length BL16, BC8 Bank Count (x4) 32 Module Configuration/Form Factor 2Rx4 RDIMM DRAM...

Now I waiting on new 128GB 8000MHz DDR5 RDIMM Micron, Monolithic 32 Gb Die. For test I pre-ordered only two pieces (256GB), but if will be ok so in future I will buy more pieces. Hopefully I won't have to wait a long time...

Oh, this he meant. But this information about PCIe lines is known from the beginning for both boards ace sage or not.

What do you mean "just SAGE is crippled"? I do not understand you. SPR-SP will always have less PCIe lanes with W790, whether ACE or SAGE.

I love my hermaphrodite. :cool:

Before QYFS I had AMD Threadripper PRO 5965WX 24cores 48threads + ASUS Pro WS WRX80E-SAGE SE WIFI I with 8x64GB Samsung DDR3 3200MHz and XFX Speedster SWFT 319 AMD Radeon RX 6900 XT. And for me is Intel QYFS is better. :)