@ms264556
Assuming the recommendation is to stay on 200.14 with a R730 flashed to R850 used as Dedicated Master, even though the WiFi features are disabled. Does it still loop? Thanks.
Problem solved. Turns out, it was neither switch nor AP related. My DNS forwarding in OPNsense wasn't working correctly and taking a long time to resolve queries, both internal and external. I'm assuming that because of lower latency, the wired connections would resolve themselves, but the...
Thanks for this. Is it something I can check via CLI? I'm just referring to the chart on the dashboard. I've disabled all the APs except for the R850 to see if I can narrow down the issue as well. Updated FW to 10.0.10c. Was getting dropped packets every 3-4 pings of the R850s IP, just sent a...
Thanks. Same firmware as before the changeover. I do plan on putting the old switch back in the rotation this weekend to narrow down if its an AP issue.
Having a weird issue. Not sure if it belongs here or in the Ruckus AP thread, as I'm trying to narrow down what's causing it. I've crossposted to both threads, but if that's not allowed please let me know and I'll remove one.
Recently took an ICX7450-48P out of service in my homelab, replacing...
New here...
I have recently acquired an ICX 7450. Does anyone know if the ICX7400-4X10GF module will negotiate SFP+ transceivers for 1/2.5/5/10G on the switch side, or it's limited to 1/10? I know some of the Mikrotik SFP+ transceivers and possibly Ubiquiti will do it, but not sure if they'll...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.