Search results

  1. W

    SOLD

    Fast and thorough packaging. Fast shipping. No issues with items. I would buy from again with no hesitation.
  2. W

    Chenbro-Cleversafe-Slicestor-1440

    LOL I'm starting to believe that some wires are wired wrong. I observed the following: With no controller connected CB3 off CB2 on CB1 on No drives and controller connected CB3 on CB2 on CB1 on I booted Solaris 11.3 live and it detects the installed drives The LED that I am referring to are...
  3. W

    Chenbro-Cleversafe-Slicestor-1440

    I sorry I wasn't clear. The LED on the backplane(s). The docs say red "When HDD is error".
  4. W

    Chenbro-Cleversafe-Slicestor-1440

    Thank you for looking. I had attached connectors to CB3 and am still getting led errors on each backplane. I am assuming that folks aren't over looking the led errors.
  5. W

    Chenbro-Cleversafe-Slicestor-1440

    So I have a M1015 HBA flashed to IT mode P20. Can you tell me what connections (CB1-3 on both cards) and dip switch settings you have? I seem to be having some issues. TIA
  6. W

    A little help please!

    So... some lessons learned: - Don't do firmware updates at 2am in the morning because you woke up to pee - That firmware image that comes with the package is rarely the one that you need - Testing the command syntax with the above incorrect image will render the SAS expander unrecognizable I...
  7. W

    A little help please!

    I will check into both firmware updating options this afternoon. I did however disable multipathing and it made no difference. Thanks
  8. W

    A little help please!

    I will double check, I figure that since it ultimately comes up and recognizes the sata drives, they were installed properly. Thanks
  9. W

    A little help please!

    It boots fine, the the expected minute or so delay for ZFS to time out. Thanks
  10. W

    A little help please!

    I purchased 4U Supermicro 45 Bay SAS2 SATA JBOD Storage Expander LSI 9200-8e SC847E16-RJBOD1 from eBay. I racked everything and installed my OS (Solaris 11.3) where upon boot it hangs right after the initial banner. It hangs for roughly 40 minutes before presenting the login prompt. I though it...