Search results

Yes we have a few left send me a message for the paypal details

One x10 motherboard left, however this one has the active 4u heatsinks, same processors, tpm 2.0, latest bios / bmc for $250. Shipping is not included.

still have 4 2680 processors left

x10 motherboard bundle sold.

We have 4 left. Also we have an X10DRL-i motherboard, with I/O back plate, TPM 2.0 will come with as well (is not shown in photo) and dual 2680 v4s. Asking $150.00 shipping included. Board is updated to latest bios and bmc.

it looka like a X10DRW-i will fit.Nope its in the wrong direction. Scrap heap it goes. thanks @BlueFox

I am not sure of the chassis model ,its a decommissioned fireeye appliance we had laying around in the back, its 2u and holds 8 sas3 drives. with a crystalfonz lcd on the front.

We have a chassis with a h8DGU-F inside it. Obliviously it needs to be replaced, but what motherboards have similar I/O layout? The chassis does not have a removable backplate.

yes, we just scrapped 2 mor servers last nite, so have 4 more

I miscounted, we are now down to 3 2680 v4. I overlooked the other server we had in the basement . and 4x E7-8890 v4 2.2GHz Processor left

.

we have 3 2680s left now. and 4x E7-8890 v4 2.2GHz Processor left

We still have a bunch left.

We upgraded our home lab to all scalable servers, so we have processors to sell. 22x E5-2680 V4 2.40 GHZ 35 MB 14-CORE 120W Processor $10.00 each 4x E7-8890 v4 2.2GHz Processor $70.00 each Located in Iowa. Accepting offers, shipping is included

Yes. Iv got those

Found a way to go to recovery mode if cimc has locked you out, and you cant get in with default credentials. hook a console cable to the cimc port on the front, and load your terminal program, when it prompts, press *** press enter, type in boot current recovery . press enter it will need a...

i have bios and cimc updates. just cant get into cimc to apply them

You can go to the bios by pressing F6 while connected to the console port. The password is not set, set a password and the bios will let you right in.

the drive in mine is an micron 5100 max 250GB SED m2 sata . There is a recovery built into the cent os boot, but its also password protected. I know you can wipe and load esxi but would rather use NFVIS

@devz3ro , yea that is the same predicament that I have