Apparently, there is an issue with iperf3 and the latest version of OpnSense.
I got it running and from my PC to the OpnSense system I am gettiung 937 Mbits/sec going from my PC to my Cisco Switch which then goes to the Netgear Switch and into my OpnSense box. I will be updating this post when...
I have not seen a teardown of this switch anywhere. Then again I have not seen this switch anywhere except on Amazon. I can't even locate it on Binardat's web page. I purchased it on Amazon's US site for $185.88. According to the ad posting it supports 12KB Jumbo Frames with a 12Mb Packet Buffer...
I only have one other system that supports 2.5 G besides the OpnSense system. So I know I need to replace the Netgear with the new switch and then connect my PC that supports 2.5G to the new switch instead of going into the Cisco
I can't get iperf3 to work on the OpnSense box
I have the plugin installed. When I go to Interfaces - > Diagnotics -> Iperf and click create instance for the LAN it does not show any port information to provide for he client on the other PC
My home network right now is all 1GB
I am running OpnSense on a Hamsing Jasper Lake based Celeron N5105 Micro Appliance Amazon item B0BB3B2Q58.
This goes into a Netgear 4 port managed 1GB switch which connects back to my main Cisco 2960-G switch which has all my other network products...
I am supposed to have Amazon item B0BNV8CBRK arrive Sunday. According to the product description, it is a fanless managed 8 port 2.5GB switch with POE. The vendor is Binardat who I never heard of. It does not have any 10GB ports. and it is selling for the low price of $ 185.88 .
The specs on...
Yep too much for my budget at the moment. I am using 20 ports of a Cisco 48 port switch but most of the systems on it are 1Gb I could go larger on the.newer switch if it would be at lower price point.
If I want a relatively quiet managed switch with 12 copper Ethernet ports or more capable of 1Gb speed and the ability to add 4 or 8 2.5GB copper Ethernet ports what do I need to get on Ebay?
I recently acquired a FCX648S-HPOE and need to know what is the correct part to get to add a QSFP+ Port so I can add 2.5GB Ethernet ports? I already purchased a XFP module which I believe is the wrong item
I had my friend place an order on E-bay because I am banned (honestly not my fault) for an ES4625M Module and a brocade fcx648s-hpoe so I could then get the Mikrotik S+RJ10 6-Speed RJ-45 Module for up to 10 Gbps Copper Module Amazon item B07YJ38TPG which supports 2.5GB ethernet but now I believe...
I do because I want to be able to turn my lights on/off from outside the house and view my porch camera through it's app.
My IoT devices are a collection of smart outlets and switches a few Google Homes a Tovala oven and a light/camera over the front door.
My wife works from home 5 days a week. I work from home two days a week, My main fear is I am going to make a mistake causing my wife to not have internet access and not know how to undo what I have.
What I want to do is
A) Have the internet fall over from Optimum to T-Mobile cellular if...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.