I meant plug the USB into the port on the D4040 and then follow the above steps provided you get the console working. Sorry for not being clear.
It should show some garbage or sometimes it may not show. Do you have the correct drivers for your console cable? How are you connecting it. Can you...
Did you try any other speed? 9800? Strangely for me it initially used 9800,8,1. Just connect the USB and it should work. Ensure the console works. The rest is easy.
Thank you. Gonna buy and try 8259CL on S2600STBR and S2600BPB and keep you posted. BTW the S2600BPB has a maximum TDP support 165watts and S2600STBR 205watts. Will the 210watt 8259CL work with a simple VRM mod? Wont a bios mod be required? Kindly let me know please.
Hi,
I have a S2600STBR and S2600ST motherboards.
(a) Do we need insert any new microcodes? or just bios update is enough?
(b) Any diagram for connecting the connector J2J2 / smbus.?
Please advise.
OK Finally got it working (D4040). The issue wasn't hardware issue at all but configuration issue. The sonic version is very old. I will compile a new one soon for this switch.
1. Image flashing
(a) Copy the below files to a vfat or fat32 format USB
sonic-broadcom.bin...
Can anyone please paste their config guide. Like how to set ip and ping. I have an intel 40gbe card and passive dac cable. I am not getting it pinging.
It is working for me. I will try to upload it mega.nz sometime tomorrow. Also I have installed it fine on the D4040 switch including the deb firmware. I am still "not" able to set an IP in the switch and ping a 40Gbe Nic on a server. Dont know what is the problem or may be I could not doing it...
Ebay basically S2600JF around 44 boards I got for like each 70$ (the complete node HNS2600JF which includes fans, heatsinks, bridge board, fan board, chassis) and then 32 nos of Intel Xeon E5-2650LV2 1.7GHz 10-Core (CM8063501287602) Processor SR19Y each 49$.
Essentially after 8-Core i7 gets...
Dibblah
I am not using the hotplug power connector. I am just putting power directly on the board. Should i also be putting 12v across the fan board? The hotplug power connector is non standard.
Dibblah
I dont understand, Can you please elaborate? Also whats the need to use fan board??
I am connecting directly like this
1) S2600JF 6 Pins to 12v with gnd
2) Connect 5v to IPMI header
3) Short pwr btn
Note: I am not using any Intel chassis.
If someone can help, I will simply the solution and put it in the forums as a tutorial for others. The boards are dirt cheap as well as 10-core, 12-core cpus.
Its got to do something with PS_ON or Power good signals. Cannot seem to find them on the board.....i can feel it...i am close...
Hello
I have purchased this board S2600JF, have been trying to follow the above advise. I have reversed the atx 12v connectors and connected to the motherboard.
I have shorted the ATX psu pins so that it gives 12v on the rails, as well connected the 5vsb to motherboard.
Once I switch on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.