Search results

  1. N

    Mellanox SX6012 issues

    oh yeah that's definitely too long. Honestly I don't remember how I fixed those issues on SX series. On SN series it's usually an incompatible BIOS or a buggy old firmware on the ASIC
  2. N

    Mellanox SX6012 issues

    How long have you waited? It often takes quite a while (~5 minutes)
  3. N

    HP Nics - security features preventing cross-flash?

    -EDAT if I remember correctly
  4. N

    The most similar analogue for Micron 5300 PRO SSD

    I'd opt for Samsung SM863 / SM883 or Intel S4610
  5. N

    Ruckus Unleashed (R750) Questions

    Nah, I think this is a misunderstanding. Only if you run the third one as Dedicated Master and select the disable WiFi service option it will not provide WiFi
  6. N

    Convert HP SN2410bM to Mellanox / NVidia SN2410?

    You can patch the EEPROM to not require license anymore, but I need to know what's in the vendor specific part to see what needs to be patched
  7. N

    Convert HP SN2410bM to Mellanox / NVidia SN2410?

    Send me the output of onie-syseeprom (ONIE shell) or sudo decode-syseeprom (Cumulus Shell) and I will have a look
  8. N

    Convert HP SN2410bM to Mellanox / NVidia SN2410?

    I‘ve never seen an HPE switch with freshly installed MLNX-OS / Onyx where port limits were enforced. Here‘s the deal: Send me a switch where this is the case and I‘ll develop an unlocking procedure.
  9. N

    Convert HP SN2410bM to Mellanox / NVidia SN2410?

    Wrong. Cumulus doesn’t need a license since years, I think version 4.4 or something (we’re now at 5.9.1 with 5.10 to be released soon)
  10. N

    Convert HP SN2410bM to Mellanox / NVidia SN2410?

    Just install stock (Mellanox) Onyx. As far as I know, no port limits are enforced. Or even better: Install Cumulus Linux.
  11. N

    EU [FS&WTB] EU-DE - FS: 2x Mellanox SN2700, WTB: ConnectX-6 / ConnectX-7 cards, Broadcom HBAs, etc

    bump Nobody looking to get rid of 64GB DDR4-3200 RDIMMs in exchange for 32GB DDR4-3200 RDIMMs?
  12. N

    Mellanox Switches - Tips & Tricks

    Yes, it does with the correct license (same as for SX6036) You mean for example 18 ports IB, 18 Ports ETH? then yes
  13. N

    Mellanox sx-6036 port splitting

    You're missing the eth after interface interface ethernet 1/34 module-type qsfp-split-2
  14. N

    EU [FS&WTB] EU-DE - FS: 2x Mellanox SN2700, WTB: ConnectX-6 / ConnectX-7 cards, Broadcom HBAs, etc

    Added Swap 48x 32GB DDR4-3200 RDIMMs -> 24x 64GB DDR4-3200 RDIMMs Added WTB 3x EPYC 7763 or OEM equivalent
  15. N

    Cheap 40GbE at home - too good to be true?

    yeah no, sadly not joking (the reason why I'm going to sell mine). But it support 8x10G mode, so it's not a hardware limitation...
  16. N

    Cheap 40GbE at home - too good to be true?

    Except on f..... Intel E810 2x100G NICs - they are not backwards compatible with 40G...
  17. N

    MSI AMD EPYC 4004 Motherboards with 25GbE and 10GbE Shown at Computex 2024

    There is also the B650D4U3-2L2Q/BCM (Very similar to the MSI D3052), which I've been waiting for forever to become available (typical Assrock)
  18. N

    Mellanox Switches - Tips & Tricks

    Oh and another warning: On ONIE based switches, DO NOT modify the System FRU / Chassis FRU EEPROM like you do in the SX6012 conversion guide. It will break the ONIE checksum and cause a lot of issues.