I agree that setup was terrible. The instructions clearly stated the password yet it would just not work. Ended up having to do a factory reset during install. And also the fact that I cannot connect to the AP via dns host name is stupid.
Have a few issues w/ a couple clients that will just...
Looking at replacing my two older APs with a WiFi 6 capable AP. Currently have a Ruckus R500 + an UBNT AP-AC-PRO. Would have ditched the AP-AC-PRO but I have issues w/ ESPHome ESP32s + the Ruckus. And now the Ruckus is dropping every client randomly until I reboot it. I live in a small single...
Using a ramdisk for an SLOG is useless. SLOG = second intent log. There is already an intent log being written to ram. An SLOG is just a backup in case of power loss. But enabling it slows the LOG to the speed of the SLOG. With the above solution you get near DRAM level of performance for an...
From my comment on the YT video.
Also I don't know if the Mitrotik actually performs better. I haven't seen anyone test it. The Aquantia AQS-107 supports 2.5/5G but it is EOL so buying a genuine one will be pricey. There are some 2.5G capable regular SPF transceivers. Haven't tested them...
There has been a bunch of testing here by members of these modules to see if they could work @ 2.5/5G. And AFAIK none actually perform well at these speeds. I tried the Ipolex module, and there are others who have tried a number of the other modules. I was getting insane amount of retries. I...
Actual print time was maybe a day or two. Not including reprints. Designing and post processing though, took hundreds of hours. Everything was printed on a Prusa MK3S w/ a few mods.
Build’s Name: The Crippled God (from a book series)
Operating System/ Storage Platform: Windows 10
CPU: AMD 5800X
Motherboard: Asus Prime X570-Pro
Video Card: MSI RTX 3070 Ventus OC 3X
Chassis: Custom
Drives: 2 x 256GB Samsung 950 Pro. FusionIO 2.4TB ioDrive Duo + 1.3TB ioScale. FusionIO's...
There were a few guys testing ECC on different AMD4 Ryzen boards over on the Hardware Canucks forum. ECC seems to work on some boards, but the errors are never reported to the OS.
https://hardwarecanucks.com/forum/threads/ecc-memory-amds-ryzen-a-deep-dive-comment-thread.75041/page-4#post-898357
What modules are you buying that has the aqs-107?
This says 'AOM-AQS-107-B0C2-CX Compatible', not sure what exactly that means tho.
https://www.ebay.ca/itm/Supermicro-AOM-AQS-107-B0C2-CX-Compatible-10G-SFP-to-RJ45-10GBASE-T-Transceiver/192715674535?hash=item2cdebfd3a7:g:RggAAOSw3HZbA5V0
Definitely was a 2.5G link. Exact same settings except for jumbo frames. I did limit to 2.4G, I would have increased it to 2.4G if it actually helped. But it can't even saturate 2.4G anyways due to the massive amount of rx mac errors / retries. Pretty sure the issue is that the Ipolex always...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.