Search results

Thanks, no more white night in the lab. But little baby white night are back :)

Hello everyone, I sell a big part of my lab at home. I'm father for the second time, and I have no more time and space for all this material. I don't have any idea of the current market price, so I put all in auction format without reserve price. - Global ...

I have the same idea, but I boot the same OS and the same node. Only the chassi is changing. I have also sweped the PSU and put 2 PSU in the "bad" node = no changes. Have you a clue where I can look in the chassi?

Hi Patrick, take care with those update. I have done these a week ago and notice no issue until 2 days. I don't know if those update ere the source of the issue that I have on 1 of my 2 enclosure. Check here, I just have opened a new thread here...

Hello, I'm back with my strange things :p I always have 2 C6100 chassis, each with 4 nodes. The L5520 have a cool function, it clock down to save power or it clock up (intel turbo mode) on the high demand. The CPU play with his multiplier to change the CPU core frequency on the fly. Until now...

Hi azev, I have L5520 in mine c6100 and they are running fine with 16gb ram module but the speed is limited to 1066. Check the spec @ page 2 http://www.dell.com/downloads/global/products/pedge/en/poweredge-c6100-spec-sheet-en.pdf But 1066 looks to be the max speed of L5520 even the server...

Hi Tsmooth3, I actually have attached 6 drives to one node. If I want to power the 3 first tray I power the 1st node. But if I wan to power the extra 3 tray I need to power the second node. Could you explain your backplane power setup with your 12 try. How do you power them in one time ?

Take a look at google stat Google spotlights data center inner workings | News Blogs - CNET News and Google?s Disk Failure Experience They are using consumer component and not server parts, then it's important to extrapolate to C6100 coponent. For me it depend of the componenet types. In a...

For the server, we love C6100 in sale here at 799$ The Server Store Check a review on this site : Dell PowerEdge C6100 XS23-TY3 Cloud Server - 2U 4 Node 8 Sockets - STH Take a look at the forum for user experience. The whole STH infrastructure is running on C6100 :-)

If you want to make cought surfing to Belgium I will share my c6100 with pleasure ;-)

A question to those who have change there origiginal fan. Do you notice a significant difference on power consumtion?

Do you believe it could be easyer to connect an eUSB like this ATP Electronics, Inc. > Products > eUSB SSD TheBay mention this in this threath http://forums.servethehome.com/hard-drives-solid-state-drives/1611-dom-vs-cheap-ssd-vs-usb-vs-pxe.html

I am ok for USB or eUSB with slc. Good tips with the irq, seriously on modern system I always doesn't care but I will now :-) Do you believe that the eUSB shown by TheBay coul directly plugged in the internal USB port discovered on the c6100 like discuss in this post...

Thanks all for your feedback! I have investigated deper and have done those thinks: Chassi 1 BIOS : 1,69 -> 1,70 = ok Chassi 2 BIOS : 1,69 -> 1,70 = ok Chassi 1 ESM/BMC : 1,29 -> 1,30 = ok Chassi 2 ESM/BMC : 1,29 -> 1,30 = ok Chassi 1 PIC/FBC : 1,16 -> 1,18 -> 1,20 = ok Chassi 2 PIC/FBC ...

Hi all, I have made a test who surprised me with his impact. I actualy have 2 C6100 with all node @ 24Gb (12 x 2Gb). I recently buy 4 x 16Gb and I have replaced the 12 x 2 by 4 x 16 for an extra amount of 40Gb of ram. When I compare the two configuration with a wattmeter at the wall plug and...

For my information, to the owner of C6100 : What is your CPU fan speed at IDLE state? 3 nodes runing on the 4. 100% same config on both chassis, I have swaped the HDD :-p Chassi 1 : IDLE : 3200 rpm Chassi 2 : IDLE : 4700 rpm Chassi 1 : Burn F@h : 3700 rpm Chassi 2 : Burn F@H : 7000 rpm

Hi DBA, I'v try the upgrade with the 1.18 fan firmware, the update work but I don't get any warn before the update. On the 1st node, no problems with the upgrade. On the 2de node, I'm not able to do the upgrade :-/ I recieve this error message. Inventec FCB Firmware Update Tool V0.92 -...

Hi everyone, I have a strange isue that could have his place in this post. I bought recently 2 x C6100 chassis. I'v tested all node one by one with F@H. All nodes of the first chassi: it was normy loudy. All nodes of the second chassi, it was extremely loudy. I beleve that the fan are...

Mmmm, "eUSB" or "KingSpec 8GB SATA Dom MLC Flash SSD Disk on Module Network PC Solid State Drive" could be a great deal, but I need to check the motherboard of the C6100 because I'm not sure there is a USB connector with pin. I agree to pay for those quality memory for the pfsense and SAN, but...

Hi everyone, I recently bought 2 C6100 chassis and I will setup something like Patrick does. I also have this storage materials: 2 x SATA SSD Plextor M5 Pro 256 Gb 12 x WD20EARX Green 2 Tb Switching : 2 x Linksys SLM2008 (8 gigabyt ports) Chassi 1 - node 1 : Pfsense 1 (CARP + PFsync...