Search results

I went to a local fastener shop bought the smallest m2 bolt and three ultra slim washers and used the bolt they shipped with, slid in with a bit of help (not pressure). Now all my M.2 slots are usable!

I bought two Intel M.2 1TB DC P4511 and couldn’t figure out how to get them both in together without the fan being in the way. The way it’s laid out is absolutely terrible.

I’m doing it because it lives in a place I’ll be able to hear it.

Took out a razor blade made some precuts and then nibbed away at it until I got the finger hold removed. Fits great minus needing to cut it, wear eye protection when cutting, this plastic goes everywhere!

I bought a used SuperChassis 826BE1C-R609JBOD on eBay and I'm trying to quiet it down, I bought the 920SQ PSUs, and now I'm dealing with the fans. I bought three Supermicro 80mm Hot-Swappable Middle Axial Fan (FAN-0074L4) to replace the stock Supermicro 80mm Hot-Swappable Middle Axial Fan...

Mine just got here, what cables is everyone using?

How can I use the samsung to make my Intel M.2 drives fit, does it come with a PCIe card or something? I don't need help with bifurcation, I know the CPU doesn't support it.

I have two Intel M.2 DC P4511 and I can't figure out how to make them fit without removing the fan. One will fit fine, all other locations blocked by the stock fan. Wanted to run them as as mirror. Or if anyone has a suggestion for a PCIe M.2 card that fits (22110), I'm taking suggestions.

The fix to my AER issues Looks like the romed8-2t motherboard has some bios settings you need to change to no longer have the AER errors

Looking around I saw a few guilds to help with swapping fans in an Eaton UPS, but nothing that put everything together. I think this diagram will really help out in that department. This based on the GrumpyTechie post listed below. Let me know if you see anything that needs to be updated or...

I'm looking at getting the SuperChassis 826BE1C-R609JBOD and I'm struggling to figure out what LSI card to get for it. This will be going into an ROMED8-2T (PCIe 4.0 x16) running TrueNAS SCALE. If I get an 8 port HBA does that mean only 8 drives would be seen, and I would need a 2nd card for...

Any good deals (new or slightly used) around Solidigm/Intel or Micron currently (with firmware available)? Looking for a pair I can mirror for running VMs on.

Lol buy my two Kioxia 7.68tb drives for sale then

What are some good PCIe 3 or 4 U.2/3 15.36TB NVME drives with end user FW support?

$150 - QNAP-QM2-2P10G1TB Comes with the flat and half hight backing plate, but not the the full hight backing plate. I bought a backing plate for another model that would just take a little dremel action to get it to fit. I have Zelle and Venmo and I'll cover shipping via USPS Pictures...

I ordered some generic single AIC to rule out everything (checked all the slots and all my nvme drives around). The Kingston drives are solid, and only the Kioxia CD6-R drives have any issue (still looking for a FW update). The drives can be formatted and store data without an issue but they...

I'm currently looking for FW updates for my pair of KCD6XLUL7T68, please message me if you can assist.

According to fwupd I have 8003

I just finished playing the move everything around game, and looks like my two Kioxia CD6-R drives (KCD6XLUL7T68) are causing all the errors. Need to figure out how to find an updated firmware or get some tech support from Kioxia.