Search results

The other switch being an unmanaged switch I have no idea how it handles STP. But as of right now I have (nearly) everything plugged back into the 7250- router and PC though the transceivers and unraid through the DAC. Coming up on an hour now and so far it is stable, about now is typically when...

I thought I'd followed directions to get it set up to support both being connected but certainly possible I have an error somewhere, I'll check on those settings and adjust though realistically I probably don't need both connections. Is having the two connections on different switches enough to...

I have unRaid set up to use two NICs, I believe bonded is the term? It'll run with one or the other and is supposed to work with both as well. Currently 10 gig NIC is connected to the 7250 through a DAC cable. 1 gig is connected to a regular switch that's also connected between the router and...

Thanks for the thoughts. I probably added the duplicate when I was trying to figure out why my connection was dropping, at first I figured I messed up setting things up so I was reentering some of it. So the line "ip route 0.0.0.0/0 192.168.1.1" accomplishes the same thing? I can remove the...

Sorry, probably should have thought of that. Config- https://pastebin.com/8sHtRDs9 As for ports- 1/2/5- unRaid connected through Amazon DAC cable 1/2/7- OPNSense connected through ethernet using SPF+ to RJ45 transceiver 1/2/8- PC connected through ethernet using SPF+ to RJ45 transceiver The...

Full disclaimer, I'm very new to home networking, managed switches and especially level 3 switches. So I have no idea if this is normal behavior, I have something configured wrong or if my switch has an issue. I purchased a 7250 to replace an Aruba 2500. Followed the guide to get it up and...