Search results

For Kicks, I recorded the boot sequence and the slowdown of the fans once boot completes, plus (last 10 sec) the noise with CPu at 100% and fans at 19% instead of 13%... Microserver Gen8 Boot noise

Sure, sent a switch to Munich last week for 20E by courier, I imagine it will be the same to Berlin ... It gets loud when it boots, otherwise very quiet (not silent, if you keep it on the desk you will hear a low hum). I am running now all cores at 3.5Ghz turbo and temps are 10 mins: 40C on...

For Sale (shipping to EU/UK only): 250EUR HP ProLiant MicroServer Gen8-Server CPU: Xeon E3-1265L@2.5Ghz Quad core (8 threads) RAM: 16Gb ECC Storage: 1 HD 3TB Western Digital RED - WD30EFRX8D 1 Sun/Oracle F800 - 800GB Enterprise NVME 4xSATA Drive slots (non hot swap) 1x SATADOM Fully...

Sold to @mrpasc

From Italy, preferrably to EU

Up?

No, you need: USB to serial adapter: https://www.amazon.co.uk/Sabrent-USB-Pin-Serial-Adapter/dp/B00065H0QQ/ref=sr_1_5?keywords=usb+to+serial+adapter&qid=1664799334&qu=eyJxc2MiOiIzLjczIiwicXNhIjoiMy40MiIsInFzcCI6IjMuMzkifQ%3D%3D&s=electronics&sprefix=usb+to+serial%2Celectronics%2C142&sr=1-5 A...

For sale is used in like-new condition MikroTik CRS312-4C+8XG-RM switch. Comes with all original accessories and packaging. I used this switch for ~7 months, side-graded to a Brocade icx7250-24p to consolidate and add POE The 10BaseT ports are 10/5/2.5 gig capable out of the box Works very well...

Replying to myself here for my long term memory and maybe to avoid the same 'issue' for other users .... Just spent a couple hours troubleshooting what I thought was an issue with my LAGs over the 10GB links ... turned out I 'forgot' to enable Jumbo frames on the Brocade, so ping was working...

Checking in, just received a 7250-24P and am putting it through its paces - trying out different cooling options (I don't need it super silent, but I would like it to be a little less noisy, we will see....) The switch will replace a CRS312-4C + 8XG-RM and a cisco sg200-26, and a passive POE...