Search results

Just got one and it does work with a ConnectX-3, but only one RJ45 port is functional, as expected. So it can be used as an alternative to a QSA adapter + 10GBase-T SFP+ if you need a copper connection. $ sudo ethtool -m enp12s0 Identifier : 0x0d (QSFP+)...

I wonder if it works with a ConnectX-3 NIC, at least for one of the two ports.

I've been able to find it on some Chinese website. Doesn't work for my R530, though: "License import was unsuccessful"

It's no longer available. Have you downloaded a copy?

It looks like it's not, I've had the same issue with 2660 v2. You may try to update BIOS, though: 37.45 MB file on MEGA

Are there are commonly available SAS RAID controllers that support drives formatted with 528 bytes per sector, either in RAID or HBA mode, i.e. can expose them to the OS as 512 byte? I've encountered some IBM SAS SSDs that, apparently, can't be formatted to 512 b/s (see this post), so I'm...

And even less, there are tons of them on eBay for $6-7 DACs can be found <$10 as well.

Right there in the wiki: My CRS305-1G-4S+IN works fine work with any SFPs. Right now I have an Arista DAC, Qlogic 10G LC fiber SPF+ and a QSFPTEK 10G/5G/2.5G RJ45 SFP plugged in.

I didn't try it on Windows, but I suppose it should just work as well without any special drivers.

Netapp DS4243/DS4246 Dell MD1200 Dell Xyratex HB-1235 EMC KNT-STL3 All of them are not drive-locked and will work with any SAS or SATA drives (or a mix of both), including the BestBuy shucked ones.

I have a wild mix of different SAS and SATA drives, 4TB-12TB, 512e and 4kn. No caveats so far. I'm not using interposers. Also, it looks like there is absolutely no difference between IOM6 and Dell 601-COMP with regard to performance and drive compatibility. I'm pretty sure both of them are...

I can't confirm this. Yes, they need 2 PSUs minimum, but work just fine with one IOM, no noise increase.

I have 2 of these shelves. The first one is older and came with IOM3 controllers, the other one is newer and came with IOM6s. I think it might be actually a DS4246, but it doesn't have "DS4246" written anywhere on it. I also picked up a Dell HB-SBB2-E601-COMP controller. It worked fine...

I have 3 of these and they, basically, just work with any drives without issues. My controller is LSI 9207-8e with IT firmware. Make sure you are using the right caddies/interposers. The ones that work should not have any large ICs on them, just two connectors and some small parts. Part number...

SolarFlare SFN5322F I got for $20 from eBay works fine on Windows 10 after installing the drivers from Xilinx site: https://support-nic.xilinx.com/wp/oem?sd=SF-107785-LS-13&pe=SF-119607-DH-2

Can MCX354A-QCBT/FCBT be used with QSFP-to-4-SFP breakout cables? Is it possible to get it to work as 8 independent 10gbe ports this way?

I can't find the controller list in the source code (bjking1/iprutils). There are only some old PCI SCSI cards mentioned in the README. Do you know of any specific model?

Are you sure that it's going to work? I'm afraid that iprconfig may fail like the other tools.

I'm using "1.8 Micro SATA 16pin SSD to 2.5 SATA 22pin" adapters I found on Amazon (Amazon.com: Cablecc 1.8 Micro SATA 16pin SSD to 2.5 SATA 22pin 7+15 Hard Disk case Enclosure White 7mm Height: Computers & Accessories) in an HP DL380p Gen8 server with 420i controller switched to HBA mode. I've...

Hi! I've got a couple of IBM 00WV995 / ST800FM0203 SSDs with the same problem. Nothing seems to work for changing the sector size to 512.