Search results

  1. K

    Anyone happen to have a LSI 9205-8e IT mode firmware bundle?

    The 9205-8e card is an HBA, not a RAID controller ... so it's always in IT mode, and cannot be flashed to IR mode.
  2. K

    Will a HP FlexFabric dual 10gig card work in a normal pci-e slot?

    Two weeks ago I jumped into this subject and failed to get my FlexLOM card working in a PCIe slot, but I wasn't able to cross-test to prove it wouldn't work. Since then I got a DL360 Gen9, and was able to both positive and negative cross-test the 560FLR FlexLOM and 560SFP+ PCIe cards in the...
  3. K

    Will a HP FlexFabric dual 10gig card work in a normal pci-e slot?

    Thanks for the input Argle. Perhaps Yannick can determine which pins we can mask with electrical tape like he figured on the SMbus problem causing so many cards to suffer boot issues?
  4. K

    Will a HP FlexFabric dual 10gig card work in a normal pci-e slot?

    I have an "HPE 665243-B21 560FLR Dual-port 10GbE FlexLOM Card" that I tried to add to an available PCIe2-x16 slot on my IBM System x3650 M3 server, but the server will not see it. I took out 2x single-port 10GbE cards in favor of this dual-port, so I know the expansion slots are fine. It is...
Top Bottom