Search results

Yes

That was my issue. You have to plug it into a router, modem, or security appliance. I could not set it up like you have it connected. Try connecting it to your router and see if that solves the issue.

What are you plugging it into? Another switch?

Fixed it! Connected Port 25 on the LB6M to my Firebox T70, added it to my Bridge that gives the 1GBE switches their network access, and voila!

Okay, maybe there is a VLAN setup on the 1GBE switches. Attached is a Screenshot of the stack's vlan.

Wiped the configuration. I have CAT6 from a 1GBE switch to port 26, and Port 1 connected to File Server via Fiber to Mellanox PCI card. I have activity and it is trying to get an IP address but does not. Gives me unidentified network. I have tried DHCP and given it a static IP with no success...

No VLAN's, nothing out of the norm as far as a basic medium business network goes. I'd love to have someone call me and teamview while connected to the switch with putty of hyperterminal. I will reset the LB6M and see what happens.

I have tried, yes. I have plugged in a CAT6 connection on ports 25-28. I have tried adding a fiber connection between my 1GBE HP Switches and the Quanta. I have used DAC between the DAC and Quanta. I cannot plug into the quanta switch and access other comptuers connected the HP Switches or the...

Can I get someone to remote onto my PC and set this switch up to work line a normal switch? I just want it to communicate with my 1GBE network and have 3 runs off of the LB6M to a File Server and another Server.

Okay, how about any insight on why I am not getting any activity via SFP ports?

Hey everyone. So I am adding an LB6M to my server rack and want to connect a few workstations to 10GBE as well as my NAS. We currently have HP 2530-48G-POE+ switches, all stacked via fiber uplinks. I want to link LB6M and one of the HP switches together for 10GBE connectivity between the...