Search results

I really appreciate your input Main reason I'd love a custom loop is to add liquid vrm cooling as well. My cpus stay upper 60s while vrms are low 80. Will see what pops up when the time comes. If I try to bump up the power higher i black screen pretty much immediately so I think I'm maxing out...

I will have to check eBay. I noticed a couple on there under $60 used. I have some misc hardware like pump and res etc floating around but yeah if they're that good I can probably just get 2 of the 360mm ones and run them as is . My case has mounting for 2 360mms on the side cover already

Not hot but I don't want to crank on it until the verge of overheating. I dialed it back to 33x and 1.113v This is my current system temp after a few days of continuous working... I am ducting in cold air from outside to the front filtered case intake so I'm cheating a little bit but I'm air...

With some cooling layout changes I'm up to 3.4ghz all 32 cores per CPU, no smt, at 1.119v running stable. Mining with xmrig at 41,000h/s Would most here recommend win 11 pro over win 10 pro?

Sent you a Pm with discord However after asking I finally found the right link to the download to the modded zenstates that works for me. The last one I tried didn't wanna work with my mobo. Currently have it at 32.5x on 1.063v. Much higher on speed and the temp climbs. I'm air cooled on 6 heat...

Any chance you can steer me to the right way to OC with the same setup? I have an H11DSI with the most recent 2.7 bios version and 2 7551 retail chips. System runs fine as is. With SMT disabled my all core freq is 2.4ghz at 100% utilization and I would love to reach over 3 as the norm without...

I have a dual Epyc system running a pair of 7551s with smt disabled, a supermicro H11DSI rev 2 board and an 850w power supply, 6 pipe 4u coolers and a big PC tower case. Would be really nice to get them running faster because I have plenty of psu wattage and thermal headroom. The system runs...

So I have a dual Epyc system running a pair of 7551 cpus with smt disabled, using a supermicro h11dsi rev 2 board and an 850w power supply. I'm wondering what the most stable method would be to bump up the clock speed or allowed tdp a bit with this board. Not sure if I can. But running no smt...