Search results

  1. D

    CWWK/Topton/... Nxxx quad NIC router

    I've ordered a USB programmer for the BIOS chip and will give that a go (). You might be right about metrise version not being compatible altough our boards label seem to indicate some sort of V1 version (V1.1). After asking CWWK about the last correct version for myboard they always come back...
  2. D

    CWWK/Topton/... Nxxx quad NIC router

    I wasn't able to get eMails through via support@cwwk.com which they mention on their website (somehow couldn't get delivered to the mailserver of that domain). Therefore I used the form on the homepage to get in contact.
  3. D

    CWWK/Topton/... Nxxx quad NIC router

    I originally wanted to return the board and get a new one - CWWK recommended originally that I should buy and use a "CH341A USB Programmer" which I originally didn't want to do as I haven't done it before. Looking at the fact that I would need to ship the device from germany to china (& back) I...
  4. D

    CWWK/Topton/... Nxxx quad NIC router

    According to what I understood from the latest CWWK response there seem to be an issue with the BIOS version in conjunction with our board - therefore I would recommend people with our board version to stay away from the BIOS version "May 15th 2024" for now. I'll update the thread after I found...
  5. D

    CWWK/Topton/... Nxxx quad NIC router

    Thanks Randycat - I didn't spot any jumpers on the board ... there are a lot of open pins, but I don't have (or did find) any documenation on the board details. Just tried to reseat the 32GB DDR5 Ram (that was working before the BIOS upgrade) without luck: If I start the board without RAM, 3...
  6. D

    CWWK/Topton/... Nxxx quad NIC router

    Someone with expereince on potentially bricked CWWK boards? When started the board comes up with a blank screen and "3 consecutive beeps + pause" in a loop .... aaaargh The Background: After following this thread and gettting excitet here, about a new family-homeserver here, I've ordered the...